IR1/3F8/IRQ 4, IR2/2F8/IRQ 3, IR3/3E8/IRQ 4 and IR4/2E8/IRQ 3.
The default setting is IR2/2F8/IRQ 3.
Mode Setting For COM B sets the communication compatibility
mode according to the type of the IR device to be connected. The
options are ASK IR and FAST IR, The default setting is FAST IR. This
item is not valid for setting if the COM B I/O Settings item is set to
Disabled.
LPT Port configures of the parallel port of the computer.
Port sets the I/O address and the interrupt request line (IRQ) settings
of the parallel port. The options are Disabled, LPT1/378/IRQ 7,
LPT2/278/IRQ 5, LPT3/3BC/IRQ 7.
Mode sets the operating mode for the parallel port according to the
type of the parallel device to be connected. You system supports EPP
(Enhanced Parallel Port) and ECP (Extended Capabilities Port)
standards, which turn the standard parallel port into a high speed bi-
directional peripheral port. The options are Standard AT,
Bidirectional, Enhanced Parallel and Extended Capabilities. This
item is not valid for setting if the Port item is set to Disabled.
DMA Setting For ECP Mode sets the DMA (Direct Memory
Access) channel of the ECP mode. The options are DMA 0, DMA 1
and DMA 3. This item is not valid for setting if the Port item is set to
Disabled and the Mode item is not set to Extended Capabilities.
Shared Video Memory sets size of the video memory shared from the
system memory. The options are 8M, 16M, 32M and 64M, and the default
setting is 32M.
USB Emulation enables or disables the system?s support for the USB
port in DOS mode.
Enable USB Port enables or disables the USB port in DOS mode.
The default setting is Enabled.
USB Keyboard enables or disables the USB keyboard in DOS
mode. The default setting is Enabled. This item is not valid for setting
if the Enable USB Port item is disabled.
%&
'( - |
ACEC
MITAC
