Enjoying Audio SourcesNContinued
Using the MAIN IN Function (A-9755 Recording
only)
You can use the A-9755 as power ampliŢer with a sepa-Unless you have the full consent of the
rate preamp. See page 13 for connection information.copyright holder, copyright laws prohibit
using your recordings for anything other
than personal enjoyment!
Input selector
POWER AMP DIRECT (MAIN IN)
Press the [POWER AMP DIRECT
1
(MAIN IN)] button for 3 seconds
until the MAIN IN indicator lights up.
The MAIN IN function comes on and
the MAIN IN indicator lights up.
Use the input selector to select
While the MAIN IN function is on, 1
the component that you want to
only audio from components con-
record from.
nected to the preamp can be output.
To turn the MAIN IN function off,
press the [POWER AMP DIRECT
(MAIN IN)] button for 3 seconds until
the MAIN IN indicator goes off.Prepare the recorder:
2
Notes:
Y Set the recorder so that itOs ready for
Y Do not connect a component that
recording.
does not have an output volume con-
Y If necessary, adjust the recording
trol to the MAIN IN jacks and use the
level on the recorder.
MAIN IN function, because the
Y See the recorderOs manual for more
sound will be output at maximum
information.
volume and may damage the A-9755
and your speakers.
Y While the MAIN IN function is on, 3Start playback on the component
the A-9755Os Volume control has no selected in step 1.
effect. Before you turn off the Note:
MAIN IN function, make sure that
If you select another input source dur-
the Volume control is not turned up
ing recording, the newly selected input
high, to prevent any loud surprises.
source will be recorded.
Y While the MAIN IN function is on,
the following A-9755 functions are
disabled:Notes:
- Volume controlY You can record on a recorder thatOs connected to the
- Input selectorMD OUT or TAPE OUT L/R jacks.
- Remote control operationY The tone controls have no effect on the signal being
- function
recorded.
- LOUDNESS control
Y When using the A-9755 as a power ampliŢer (MAIN
- Recording
IN function), recording is not possible.
- Muting
Operate the connected preamp for
some of these functions including
controlling volume, selecting input,
and muting. The [STANDBY] and
[ON] buttons on the remote control-
ler will work even when the MAIN
IN function is on.
17 |
ACEC
ONKYO
