AA-V40EG/EK
SW
*
UN
*
Printed in Japan 1200AYV
EG/EK
Plug the AC Adapter/ChargerOs power cord into an AC outlet.Connect the AC Adapter to the camcorder.Be sure to use the DC cord provided with your camcorder.When using the provided DC cord, make sure you connect the end of the cable with the core filter to the camcorder. The core filter improves performance of equipment.
NOTES: cc
You can connect the camcorder to an AC outlet using the AC Power Adapter/Charger (if the camcorder is supplied with a DC cord).12
VICTOR COMPANY OF JAPAN, LIMITED
DC cord
To DC Input connector
To AC outlet
Power cord
To DC OUT connector
AC Power Adapter/Charger
SUPPLYING POWER
COPYRIGHT? 2000 VICTOR COMPANY OF JAPAN, LTD.
EN-6
EN-5EN-7
, 1.2 A, 1.8 A
Fully charging time
approx. 1 hr. 30 min.*approx. 2 hrs.*approx. 3 hrs. 20 min.*
AC 110 V N 240 V, 50 Hz/60 Hz23 WDC 7.2 V(When charging) DC 6.3 V(When supplying power)0!C N 40!C10!C N 35!C68 (W) x 38 (H) x 110 (D) mmAA-V40EG: Approx. 260 g AA-V40EK: Approx. 340 g
Battery pack
NOTE:Perform charging where the temperature isbetween 10!C and 35!C. 20!C to 25!C is theideal temperature range for charging. If theenvironment is too cold, charging may beincomplete.BN-V408UBN-V416U (optional)BN-V428U (optional)25!C.period, charging time will be longer than the time indicated above.SPECIFICATIONSPowerPower consumptionOutputOperating temperatureCharging temperatureDimensionsWeight
*When charged at temperatures between 20!C andYWhen charging Battery Packs after a long storage
mark
Plug the AC Adapter/ChargerOs power cord into an AC outlet. The POWER indicator lights.Remove the battery packOs protective cap. Attach the battery pack with the aligned with the corresponding marks on the AC Power Adapter/Charger. The CHARGE Indicator begins blinking to indicate charging has started.When the CHARGE indicator stops blinking but stays lit, charging is finished. Slide the battery and lift off. Remember to unplug the AC Adapter/ChargerOs power cord from the AC outlet.
DURING USE . . .The AC Power Adapter/Charger is specifically designed to charge BN-V408U, BN-V416U and/ or BN-V428U Battery Packs.When charging a brand new Battery Pack, or one thatOs been in storage for an extended period, the Charging Indicator may not come on. In this case, remove the Battery Pack, then reattach and try charging again.If you connect the DC Cord to the DC Connector while a Battery Pack is being charged, power will be supplied to the camcorder and charging will end incomplete.Vibration noise can sometimes be heard coming from the inside of the AC Power Adapter/Charger. This is normal.The AC Power Adapter/Charger processes electricity internally, and will become warm during use. This is normal. Make sure to use the AC Power Adapter/Charger in well-ventilated areas only.If the battery operation time remains extremely short even after having been fully charged, the battery is worn out and needs to be replaced. Please purchase a new one.
123cccccc |
ACEC
JVC
