Using the Oven Control (cont?d)
!WARNINGDelayed Self-clean Cycle
Self-clean feature uses high oven temperature to clean oven interior.
To avoid risk of personal injury,
Set oven to begin and end cleaning at later time. Range control begins
do not touch oven vents, or area
around vents, during self-cleaning.the self-clean at your specified start time.
1. Prepare oven for self-cleaning (see below left). Oven bottom
These areas can become hot
recess must be checked for grease build up before beginning a
enough to cause burns.
self-clean cycle. See Care and Cleaning.
2. Close door.
3. Press START COOK/CLEAN pad.
4. Set starting time for the cleaning cycle.
!CAUTION
? Default time is current time of day.
To avoid fire or smoke damage, ? Start time can be set from current time to
? remove any flammablecurrent time plus 11 hours and 59 minutes.
materials from storage drawer5.. Turn oven temperature knob to CLEAN.
Items like plastic containers and? Default self-clean cycle length of 3 hours will display.
paper manuals can melt or burn.6. Set cycle length for self-clean.
? clean excess spills before? Use arrow keys to adjust time as necessary.
starting a self-clean cycle.? Clean cycle can be set from two to four hours in five minute
increments.
? Default setting for the cycle is three hours.
7. Self-clean cycle is set.
!WARNING? Oven cannot be used until completion of the self-clean cycle.
? Self-clean cycle will begin at selected start time.
To avoid risk of personal injury,
? To view start time, press the START COOK/CLEAN pad.
property damage, or fire, clean
? OVEN ON indicator light will turn on when the self-clean cycle
excess grease and soil from
begins and will remain on until the end of the cycle.
oven before beginning a self-
? To view the clean cycle time, press the COOK/CLEAN TIME pad.
clean cycle.
? At the end of the self-clean cycle, OVEN ON indicator light shuts
off and the oven does not maintain the high temperatures. Oven
Do I need to prepare?
will still be hot, however.
To get the best results from the
? The LOCKED indicator light will remain on until oven reaches a
self-clean cycle, follow these steps:
cooler temperature. LOCKED light will flash while door is
?Clean excess spills from ovenunlocking, and then shut off when door has unlocked. Oven
interior and bottom thoroughly. cavity will be hot to the touch. DO NOT attempt to open door
? Remove birds or animalsprior to LOCKED indicator light shutting off. Once oven is cool,
susceptible to smoke or otherturn oven knob to OFF position.
fumes from the room or
Interrupting the self-clean cycle
adjoining room.
To stop a self-clean cycle that has already started follow these steps.
?Open window if possible.
If the interruption occurs mid cycle, the oven will remain locked, even
?Make sure oven light cover is
though the cycle has stopped, until the oven cavity has cooled to a safe
properly in place. Do not use
temperature.
cleaning cycle if it is not.
?Remove oven racks and all cooking
1. Turn oven temperature knob to OFF position.
utensils from oven.
2. When oven has cooled to a lower temperature, LOCKED light
? Remove items from range top
shuts off. Door can be unlocked. DO NOT force door. This can
backguard and storage drawer.
cause damage to the latch.
These areas can become hot
during self-cleaning cycle.
?The range vents from the center
bottom of the backguard. Make
sure this area is unobstructed by
removing all items from backguard
and range top.
16 |
ACEC
WHIRLPOOL
