To clear Timer delay program:To select the fan speed (in Cool or Power Saver mode
NOTE: Air conditioner can be either on or off.only):
Press TURBO, HIGH or LOW.
Press and hold TIMER ON/OFF for 3 seconds. Indicator light will
shut off.
To see the remaining time (in hours):
1. Press TIMER ON/OFF once after it has been programmed. Turbo
2. While the display is showing the remaining time, you can FAN
press the up arrow or down arrow to change delay time (1 to SPEED
24 hours).
High
To operate air conditioner with remote control
Low
To raise the temperature:
Press the plus button. Each time you press or hold the plus
button, the temperature will increase 1° until it reaches 86°F
(30oC).
POWERAuto Cool
TurboMODECool
FAN
SPEED
HighFan Only
LowTIMER Power SaverTo lower the temperature:
Press the minus button. Each time you press or hold the minus
TEMP / TIME
button, the temperature will decrease 1° until it reaches 64°F
(18oC).
To set the Timer for a 1- to 24-hour delay until the air
conditioner turns off (the air conditioner must be On):
1. Press TIMER. Indicator light on the air conditioner will flash.
NOTE: Two AA batteries (not included) power the remote control.
Replace batteries after 6 months of use, or when the remote
control starts to lose power. TIMER
2. Press the plus or minus button to change delay time (1 to
To turn the air conditioner on or off:
24 hours).
Press POWER.
3. Press TIMER again or wait 10 seconds. Indicator light on the
air conditioner will remain on.
To set Timer to turn on air conditioner, keeping previous
POWERsettings:
1. Turn off air conditioner.
To select the mode:
2. Press TIMER. Indicator light on the air conditioner will flash.
Press AUTO COOL, COOL, FAN ONLY, or POWER SAVER.
3. Press the plus or minus button to change delay time (1 to
Auto Cool? fan speed is adjusted automatically.
24 hours).
Fan Only?fan speed is automatically set at Turbo. 4. Press TIMER again or wait 10 seconds. Indicator light on the
air conditioner will remain on.
Cool or Power Saver?you can adjust the fan speed.
To set Timer to turn on air conditioner, changing the
previous settings:
1. Turn on air conditioner.
Auto Cool
2. Adjust Mode to AUTO COOL, COOL, FAN ONLY, or POWER
SAVER.
3. Adjust FAN SPEED to Turbo, High or Low.
MODECool
4. Adjust temperature between 64°F (18oC) and 86°F (30oC).
5. Wait 3 seconds before turning off air conditioner.
6. Press TIMER. Indicator light on air conditioner will flash.
Fan Only
7. Press the plus or minus button to change delay time (1 to
24 hours).
8. Press TIMER again or wait 10 seconds. Indicator light on air
Power Saver
conditioner will remain on.
11 |
ACEC
WHIRLPOOL
