MAINTENANCE
Grease filters
CLEANING METAL SELF-SUPPORTING GREASE FILTERS
Resetting the alarm signal
Y Press button R, using a sharp object (for example the
tip of a pencil).
Y The Alarm indicator led S4 will go out.
Cleaning the filters
Y Remove the filters one at a time by releasing the
fixing hooks.
Y Wash the filters, taking care not to bend them. Allow
them to dry before refitting.
Y When refitting the filters, make sure that the handle
is visible on the outside.
Activated charcoal filter (Recirculation version)
REPLACING THE ACTIVATED CHARCOAL FILTER
Y The filter is not washable and cannot be regenerated.
It must be replaced when led S5 flashes or at least
every 4 months. The alarm signal will only light up
when the extractor motor is switched on.
Resetting the alarm signal
Y Press button R, using a sharp object (for example the
tip of a pencil).
Y The Alarm indicator led S5 will go out.
Replacing the Filter
Y Remove the metal grease filters
Y Remove the saturated activated carbon filter by
releasing the fixing hooks
Y Fit the new filter by hooking it into its seating
Y Replace the metal grease filters.
Lighting
LIGHT REPLACEMENT
20 W halogen light.
Y Remove the 2 screws fixing the ring nut.
Y Extract the lamp from the lamp holder by pulling
gently.
Y Replace with another of the same type, making sure
that the two pins are properly inserted in the lamp
holder socket holes.
Y Replace the ring nut and fix it in place using the two
screws removed as above.
GB19 |