User Tools
MenuDescription
ADF Thin paperUse when changing the type of originals to be fed. Select this function to avoid damag-
2
ing thin originals (40 - 52g/m, 11-14 lb) set in the document feeder.
Note
p Default: Off
ADF Mixed SizesBy default, you cannot set originals of different sizes at one time in the document
feeder. You can cancel this setting.
Note
p Default: Off
p If you select [On], the copying speed will be reduced.
p When setting different length originals, all originals must be flush with the back fence
of the document feeder.
p Smaller size originals might be skewed a little.
ADF Auto Paper SelectBy default, the Auto Paper Select is selected when you set originals in the document
feeder. You can cancel this setting.
Note
p Default: On
Full Color Copy SortingYou can disable sorting, stacking, or stapling in Full Color mode to maximize quality of
full color copies.
Note
p Default: Off
Auto Sort ModeYou can have the machine select Sort mode automatically when you insert two or more
originals in the document feeder and make two or more copies from each original.
Note
p Default: On
Special Mode Program(s)
Special Mode forUse to recall the special modes set by your service representative.
Copying
Auto Color Calibration
Copy Mode/Printer ModeWhen the tone of a specific color is strong or the color tone of copies is different from
that of originals, perform this function. This function adjusts the balance of the 4 basic
colors.
1. Press the [Auto Color Calibration] key.
2. If your machine has the printer option installed, select copy mode or printer mode.
Then press the [Start] key.
3. Press the [Print Start] key.
Note
p The test pattern is delivered to the copy tray.
4. Set the test pattern on the exposure glass (platen glass). [Scan Then press the
Start] key.
Limitation
You cannot set the test pattern in the document feeder.
Note
p To return to the previous setting, repeat steps 1 to 3 and press the [Prev. Setting]
key.
162 |
ACEC
RICOH
