1Żó
�?´
Emergency eject
If the cassette cannot be ejected by pressing the
3While pushing in with the screwdriver, turn the
EJECT button, use a screwdriver or similar tool to
EMERGENCY screw counterclockwise until the
press and turn the EMERGENCY screw. This
tape is ejected.
enables the cassette to be removed.
OThis screw needs to be rotated through about 20
turns after the first turn until the unloading can
Set the power to OFF.be started.
1
OThis screw needs to be rotated through about 90
turns after the first turn until the tape is ejected.
Remove the rubber cap where shown in the figure.
2
Insert a Phillips head screwdriver into the cross-
4Remove the cassette.
shaped part of the EMERGENCY screw (red).
1Set the power to OFF.5Return the rubber cap to its original position.
4Cassette
holder
<Notes>
ODo not turn the EMERGENCY screw except in an
emergency.
ODo not turn the screw clockwise. Stop turning the
screw as soon as the tape is ejected. Otherwise,
the mechanism may be damaged.
OAfter the tape is ejected, the cassette holder will not
lock into place even when an attempt is made to
close it. Be sure to turn the power off and turn it
2,5back on to reset the mechanisms operation, and
EMERGENCYthen close the cassette holder.
screwOA clicking sound will be heard when the
EMERGENCY screw is turned: this sound is made
by the reel drive operation and is therefore not
indicative of a malfunction.
3Push in and turn at the same time.
OThis screw needs to be rotated through about 20 turns after the first turn until the unloading can be started.
OThis screw needs to be rotated through about 90 turns after the first turn until the tape is ejected.
Error codes
One of the following error codes appears in the
Code No.Description of error
display window when an error has occurred in the unit
for some reason.04Pinch solenoid problem
08Cleaning solenoid problem
0BSupply reel problem
0CTake-up reel problem
0DCapstan problem
0ECylinder problem
0FLoading problem
38Servo transmission problem
3FCamera transmission problem
61Audio initialization problem/Temporary power
outage.
6FReference signal problem
11Video initialization problem
128 |
ACEC
PANASONIC
