AJ-HPX2000P(VQT1D27-1)E.book 94 287887437E
13When the JOG dial button is pressed, the following 14Turn the JOG dial button to move the arrow (cursor) to
message appears.YES, and press the JOG dial button.
The current white shading correction value, the flare
compensation value, and the RB gain offset
correction value are stored in the built-in memory of
the unit.
? Note
The values will not be stored in the unit?s internal
WRITE?memory if another menu screen is selected without
YES
# NOexecuting WRITE or if the menu is exited.
15Press the MENU button.
The setting menu is cleared, and the displays
showing the unit?s current statuses appear at the top
and bottom of the viewfinder screen.
To read the lens file from the builtin memory
1Using menu operations, open the <LENS FILE> 6When the JOG dial button is pressed, the following
screen from the FILE page.message appears.
2Turn the JOG dial button to move the arrow (cursor) to
the FILE SELECT item.
3Press the JOG dial button and the file number will
flash. Turn the JOG dial button to select the file (1 to
8) to be read.
READ?
< LENS FILE > YES
# NO
# FILE NO. :1
READ
WRITE
RESET ALL
7Turn the JOG dial button to move the arrow (cursor) to
TITLE:
YES, and press the JOG dial button.
1: 5:The recorded correction values for the white shading,
2: 6:
3: 7:flare, and RB gain offset are read.
4: 8:
8Press the MENU button.
The setting menu is cleared, and the displays
4Press the JOG dial button to enter the file number.showing the unit?s current statuses appear at the top
and bottom of the viewfinder screen.
5Turn the JOG dial button to move the arrow (cursor) to
the READ item.
< LENS FILE >
FILE NO. :1
# READ
WRITE
RESET ALL
TITLE:
1: 5:
2: 6:
3: 7:
4: 8:
Adjustments and Settings for Recording : Handling data
94 |
ACEC
PANASONIC
