Parts and their functions
Calling scene file dataE1
1. From among the 1 to 8 scene file switches, press theGAIN
number of the switch that corresponds to the scene file-6 -3 0369 12
which is to be called and light its lamp.
2. The scene file is now read. The data read from the scene
file is input into the current file and then output.
3. When the scene file is read, the data left in the current file
until that moment is temporarily saved. The lamp of the2
scene file switch remains lighted even after the data has
been called.1Gain selection status display [GAIN display]
This displays the video input sensitivity gain.
To stop calling the scene file, press the scene file switch�6 dB: The input sensitivity is increased by �6 dB.
with the lighted lamp and turn its lamp off. The data that�3 dB: The input sensitivity is increased by �3 dB.
was temporarily saved before the scene file was called is0 dB: The input sensitivity is increased by 0 dB (standard
now returned to the current file as the setting information,setting).
and the setting statuses established prior to the scene file3 dB: The input sensitivity is increased by 3 dB.
call are also restored.6 dB: The input sensitivity is increased by 6 dB.
If a scene file switch other than the one with the lighted9 dB: The input sensitivity is increased by 9 dB.
12 dB: The input sensitivity is increased by 12 dB.
lamp is pressed and its lamp is lighted, the scene file
corresponding to the number of the scene file switch with
the now lighted lamp is called.2Gain setting increment, decrement switches (2, 1)
These are used to set the gain selection.
2Scene file storage switch [SCENE FILE STORE]
This is pressed to store setting or adjustment data asF12
scene files.
SHUTTER
Saving the current file as a scene file
1. When the scene file storage switch is pressed, its lampONVAR
4
lights up.
2. When the switch with the number of the scene file in which
the data is to be saved is pressed and its lamp is lighted,
the saving of the current file starts and, upon completion,
the lamp of the scene file storage switch goes off.3
3Scene file selector switch [SCENE 1-4/5-8 SELECT]1Shutter switch [SHTR ON]
This is used to set the electronic shutter mode or V.RES
mode, which has already been set, to ON or OFF. When
DMonitor selector switches
it is selected, its lamp lights. The 4-digit LED display
[R, G, B, SEQ, ENC MONITOR]shows the reciprocal of the shutter value (CCD charge
These are used to select what is to be displayed on thestorage time) or the V.RES mode.
waveform monitor (WFM) and picture monitor.
The output mode can be changed by selecting the MSEL2Shutter mode selector switch [VAR]
and MLINK settings on the fourth tier of the SYSTEM screen.This is used to select the step electronic shutter mode or
If MLINK is set to ON when BLACK SHADING and WHITEthe continuously variable shutter mode. Its lamp lights up
SHADING are to be adjusted, the monitor display is alsowhen the continuously variable shutter mode has been
switched temporarily in linkage with the R, G and B shadingselected.
switches.
3Shutter/V.RES display
Monitor selectorHDTVSDTVIn the electronic shutter mode, this indicates the reciprocal
switchY/-GP-MY/-GP-Mof the shutter value; in the vertical high resolution mode, it
indicates the resolution steps (11 to 19).
RRRRR
GGGGG4Increment, decrement switches [3, 4]
BBBBBThese are used to change the 4-digit LED display data in
SEQRGBYRGBY/-Gthe electronic mode or V.RES mode.
If 4 is pressed in the V.RES mode, the data appears
ENCRGBYVBSVBS
when O100� is shown as the shutter value on the
The R, G and B switches can be selected simultaneously.shutter/V.RES display.
The RGB outputs on the WFM display are shown as a
parade display.
14 |
ACEC
PANASONIC
