1gb59055.fm5 Page 10 Monday, November 11, 2002 6:54 PM
BEFORE USING THE GLASS CERAMIC HOB
? To make the most of your new appliances read the
users instructions carefully and keep them on
hand for consultation in the future.
INSTALLATION
Cooktop
? The cooktop must be set into a worktop
between 20 mm and 50 mm thick. There must
be nothing between the cooktop and the oven
(cross rails, brackets, etc.).
? If the cooktop is to be installed next to a
column unit, leave a distance of at least
100 mm from the edge of the cooktop to the
side of the column unit.
? Cut an opening in the worktop of the dimensions
shown in the Product Description Sheet supplied
separately.
N.B.: Remove the protective film before installing the
cooktop.
? If the worktop is made of use wood, the supplied
spring clips and screws.
1. Position the 4 clipD) as shs ( own and at the
specified dimensions
2. Secure the clips using Escrews ().
3. Fit the cooktop into the worktop.
? If the worktop is made of marble, ceramics,
natural stone, , the cooktop must etc.be secured
with brackets F) co( de 4819 404 78697 (to be
requested from After-Sales Service).
1. Fit the cooktop into the worktop.
2. Position the 4 braFckets ) as sh( own in the figure,
in accordance with the thickness of the worktop.
3. Fix the 4 screGws () in holes H). (
10 |