Code
Function (Purpose)PurposeSectionItem
Main Sub
521Used to adjust the duplex print mode AdjustmentDuplexOperation
stacking capacity (Used to adjust the
stop position of the duplex unit paper
tray width alignment plate. The home
position of the width alignment plate
is changed by software.)
538Used to adjust the document feeder AdjustmentAutomatic document Operation
unit document scanning position.feeder
601Used to check the operation of ICU Operation test/checkICU (Memory)Operation
PWB image DRAM read/write.
614Used to adjust the scanner (writing) AdjustmentScanner (writing)Operation
unit (LED array unit) skew.
631Used to check the result of shading Adjustment/Setting/Scanner (Exposure)Operation
correction. (The shading correction Operation data output,
data are displayed.)check (display, print)
3Used to adjust the CCD color AdjustmentScanner (reading)Picture qualityColor balance
balance (gamma).
5Used to set the CCD color balance SettingScanner (reading)Picture qualityColor balance
(gamma) default.
6Used to check the color balance Adjustment/Operation Image process (MFP)Picture qualityColor balance
(gamma) check patch.data output check
(display, print)
7Used to set the target color balance SettingImage process (MFP)Picture qualityColor balance
(gamma) for auto color balance
adjustment. The standard color
balance (gamma) or an optional color
balance (gamma) is set as the
service target.
8Used to set the service target of the SettingScanner (reading)Picture qualityColor balance
automatic color balance adjustment
(SIM 46-24) and the automatic color
balance adjustment target of the key
operator program to the same
balance as the factory target of the
automatic color balance adjustment
(SIM 46-24).
9Used to adjust the CCD gamma SettingScanner (reading)Picture qualityColor balance
(CCD calibration) (copy document
mode).
10 Used to set the copy document mode SettingScanner (Image Picture qualityColor balance
color balance (gamma) default.scanning)
11 Used to set the factory color balance SettingScanner (reading)Picture quality
in the automatic color balance
adjustment (SIM 46-24).
641Used to adjust the operations of the Operation test/checkPrinterOperation
printer section (self-print operation/
color). (The print pattern, paper feed
mode, print mode, print quantity, and
density can be changed optionally.)
2Used to print the color patch image Adjustment/Setting/PrinterOperation
(adjustment pattern). The above Operation data output,
color patch image (adjustment check (display, print)
pattern) is outputted according to the
currently adjusted color balance
(gamma). Use SIM 63-7 to read the
color patch image (adjustment
pattern), which can be used as the
service target of the automatic color
balance (gamma) adjustment.
3Used to check the operations of the Operation test/checkPrinterOperation
printer section (self-print operation/
BW). (The print pattern, the paper
feed mode, the print mode, the print
quantity, and the density can be set
optionally.)
651Used to adjust the touch panel (LCD AdjustmentOperation (Display,
display section) detection position.procedure)
2Used to check the result of the touch Adjustment/Setting/Operation (Display,
panel (LCD display) detection Operation data output, procedure)
position adjustment. (The check (display, print)
coordinates are displayed.)
661Used to change/set the soft SW SettingFAX
setting (FAX-related items). (When
the FAX is installed.)
2Used to initialize the soft SW setting SettingFAXDataInitializing
(FAX-related items) according to the
destination. (When the FAX is
installed.)
AR-C172M SIMULATION 9 - 10 |
ACEC
SHARP
