14AG2DC (09-16)EN
Presetting Channels (continued)
Manual Channel Preset (MANUAL):
Setting a channel to a desired TV station.
(TV set)!Press the PICTURE (PRESET- 1)Sound System
button on the TV set for more than
2 seconds. The Auto mode screen
appears.
!,@,^ $#@Press the PICTURE (PRESET- 1)
button again to display the
MANUAL mode screen.
#Press the CHANNEL UP (CHr)
TV/VIDEO
or DOWN (CHs) button to
choose the channel position to be
123set. (The illustration on the right
456shows that channel 5 has been
selected to be set.)
789
0$Press the VOLUME UP ()
or DOWN () button on the
CH
TV set to locate the channel you
CH
want to preset to the position.Channel position
Search is initiated and when a TVnumber
#
FUNCTION TIMER PICTUREsignal is received during the
search, the search stops.
SYSTEM NORMAL
YThis step can only be done by
pressing the VOLUME UP
() or DOWN () button
on the TV set.
TV
%Repeat steps 3 to 4 above to set
the channel position for other
broadcast, cable channels, etc.
^After the above operation, press
the PICTURE (PRESET- 1 )29
PAL
button on the TV set again. B/G
The TV set returns to normal
mode and the channel number
last preset is displayed on the
upper right corner.
Y SOUND SYSTEM may not have been
set correctly, if noise can be heard or
if there is no sound.
In such case, reset the SOUND
SYSTEM using the SYSTEM button
on the remote control.
Y If you use Manual Channel Preset in a weak reception area, or under bad reception conditions, you might not
pick up the broadcast you expect, instead you might skip to another broadcast. If this happens, when the
picture appears on the screen, press the VOLUME UP ( ) or DOWN ( ) button to force Manual Search to
stop, then first adjust the picture to optimum using FINE TUNING (Please see page 11).
10
Dimension: 176 x 250mm |
ACEC
