TIMER ON
The unit will turn on automatically according to your setting.
Timer duration can be set from a minimum of half an hour (30 minutes) to a
maximum of 12 hours.
Up to 9.5 hours, you can set in half-hour (30 minute) increments, and from 10 to 12
hours, in 1-hour increments.
Point the remote control at the signal reciever window
on the unit.
Press the TIMER ON ( ) button.
1
? The time setting will change as you press the
button as follows.
0.5h 1.0h 1.5h10h 11h 12h
Hold the button down to speed through the set-
ting.
? The orange TIMER lamp ( ) on the unit will
1
light.
? The unit will generate a beep when it receives
the signal.
? The time setting will count down to show the
remaining time.
Select the mode, temperature and fan speed set-
ting as desired.
? When the temperature is set with the TIMER ON, the
temperature will show in the display for 5 seconds
and then return to the time display.
? If you do not change the setting, the unit will operate
using the most recent settings.Display shown when you
? The unit will turn on prior to the set time to allow the
set the unit to reach the
room to reach the desired temperature by the pro-
desired room temperature
grammed time. (Awaking function)
6.5 hours later.
NOTES ON TIMER SETTING AND OPERATION
? The latest time setting will be memorized and will appear on the remote control display
the next time you set the TIMER OFF or TIMER ON.
? The TIMER OFF and TIMER ON can not be set together.
Only the most recent TIMER setting will be valid.
? While ONE-HOUR OFF TIMER is set, the TIMER OFF and TIMER ON setting are
unavailable.
? If the ONE-HOUR OFF TIMER is set while the TIMER OFF or TIMER ON is activated,
the TIMER ON or TIMER OFF setting will be cancelled.
15 |
ACEC
SHARP
