AV1Setup
INPUT SELECT PARAMETER SETTINGS
The table below describes INPUT SELECT parameter settings.
DIGITALANALOGAUTO
The AV1 automatically sets the INPUT SELECTThe AV1 automatically sets the INPUT SELECTThe AV1 automatically sets the INPUT SELECT
parameter to DIGITAL when the ANALOG INparameter to ANALOG when the DIGITAL INparameter to AUTO when both digital and
parameter is set to NONE.parameter is set to NONE.analog audio input connectors are assigned.
The AV1 sends the assigned digital audio The AV1 sends the assigned analog audio The AV1 toggles between sending the
input connector to the audio outputinput connector to the audio output con-assigned digital and analog audio input
connectors. The AV1 ignores thenectors. The AV1 ignores the assigned digi-connectors to the audio output connec-
assigned analog audio input connector.tal audio input connector.tors based on the input source that is
present. For example:
The digital audio input connectors are com- The ANALOG IN parameter assigns an ana-
patible with PCM (44.1kHz, 48kHz,log audio input connector for the selected- When a 2-channel PCM, Dolby Digital
88.2kHz and 96kHz), Dolby Digital andinput.or DTS(-ES) source is present, the AV1
DTS(-ES) sources. If an incompatible digitalautomatically selects the assigned digi-
audio source (for example, MPEG or MP3)tal audio input connector.
is present, the AV1 automatically selects the- When an SACD source is present and a
assigned analog audio input connector.digital source is not present, the AV1
The DIGITAL IN parameter assigns a dig-automatically selects the assigned ana-
ital audio input connector for thelog audio input connector.
selected input.
The AUTO setting is recommended for
components that generate both digital
and analog signals, such as DVD/SACD
players.
3-19 |
ACEC
HARMAN KARDON
