AV-32X37SUE AV-32X37HKE
AV-32X37HIE AV-32X35HUE
AV-32X35HKE AV-32H35SUE
3.5.2 FOCUS ADJUSTMENT
Measuring
ItemTest pointAdjustment partDescription
instrument
FOCUSSignalFOCUS 1 VR(1) Receive a cross-hatch signal.
adjustmentgenerator(Horizontal line)(2) Select the FULL mode.
FOCUS 2 VR(3) By turn the FOCUS 2 VR, adjust the picture so that
(Vertical line)the part of circle mark on the vertical line may
[In HVT]become thinnest.
(4) Turn the FOCUS1 VR so that the third horizontal line
from the top of the cross hatch screen has equal
thickness in the center of the screen and around the
center.
(5) Make sure that when the screen is darkened, the
lines remain in good focus.
HVT
FOCUS 1
FOCUS 2
SCREEN
FOCUS 2
FOCUS 1
3.5.3 VSM PRESET SETTING
Measuring
ItemTest pointAdjustment partDescription
instrument
VSM PRESETRemote [5.VSM PRESET](1) Select STD(standard) of PICTURE MODE with the
settingcontrol unit(BRIGHT/SOFT/STD)[MENU] key.
1. CONT.(2) Select 5.VSM PRESET.
2. BRIGHT(3) Adjust the [FUNCTION UP/DOWN] and [-/+] key to
3. SHARPbring the set values of 1.CONT to 5. HUE to the
4. COLOURvalues shown in the table.
5. HUE(4) Press the [MENU] key and memorize the set value.
(COOL/WARM/(5) Respectively select BRIGHT or SOFT of PICTURE
NOMAL)MODE, and make similar adjustment as in 3 above.
1. WDR R(6) Press the [MENU] key and memorize the set value.
2. WDR G(7) Select COOL of COLOUR TEMP with the [MENU]
3. WDR Bkey.
(8) Select 5.VSM PRESET.
(9) Adjust the [FUNCTION UP/DOWN] and [-/+] key to
VSM PRESET setting item
bring the set values of 1.WDR R to 3. WDR B to the
1.CONT. 2.BRIGHT 3.SHARP 4.COLOUR 5.HUEvalues shown in the table.
BRIGHT+70000(10) Press the [MENU] key and memorize the set value.
(11) Respectively select NORMAL or WARM of
SOFT-30-200
PICTURE MODE, and make similar adjustment as in
STANDARD00000
9 above.
(12) Press the [MENU] key and memorize the set value.
1.WDR R 2.WDR G 3.WDR B
COOL-15-90* Refer to OPERATING INSTRUCTIONS for the
WARM+400PICTURE MODE.
NORMAL000
1-20 (No.52107) |
ACEC
JVC
