Setting and changing of menu items
Return to filming mode.
42Zebra 1 Level (70% to 109%)
When performing the settings with theZebra 2 Level (71% to 110%)
convertible camera:Two types of zebra patterns are displayed to use as
Press the MENU or ITEM/AWC button anda yardstick for the brightness level.
select End on the main menu, then press The thestriped zebra pattern display of Zebra 2 Level
YES/ABC button.is more dense than that of Zebra 1 Level.
When performing the settings with the remote<Notes>
OThese settings are available when ON has
control unit:
OWV-RC700A:been selected for the Zebra Indicator 1 setting.
Set the USER SET switch to OFF. OThe setting for Zebra 2 Level should be set at
least 1% higher than that for Zebra 1 Level.
OWV-RC550:
Set the SET UP switch to OFF.
3Safety Zone
This selects the type of safety zone that is
After being returned to filming mode, the
convertible camera will operate as per the changeddisplayed in the viewfinder.
settings.If OFF is selected, a safety zone will not be
displayed.
<Note>
The safety zone and the center marker reflect the
electrical positions which may differ from the optical
$ Optional card settings submenu
positions.
123
ccOption Card Setcc
1Zebra IndicatorON
Zebra 1 Level70%
2
Zebra 2 Level85%
3Safety Zone1
4EVF OutputY
45
End
1Zebra Indicator
This sets the Zebra pattern display which The appearsinner frame and the outer frame are
in the viewfinder.approximately 90% and 95%, respectively, of the
ON :Zebra patterns are displayed in safety zone.the
viewfinder.
OFF :Zebra patterns are not displayed 4in EVF Outputthe
viewfinder.This sets the signals to be output to the viewfinder.
<Note>Y:Brightness signals are output to the
Even if ON is selected for this setting, the zebraviewfinder.
patterns will not be displayed in the viewfinder CVBS :Color signals are output to the viewfinder.if
CVBS has been selected as the EVF 4Output <Note>
setting.The zebra pattern is not displayed in the viewfinder
when CVBS has been selected.
9 |
ACEC
PANASONIC
