2. Camera Mounting
1. Fix the mounting adaptor to the top or bottom of the
camera.
When changing the camera mounting adapter, use a
screwdriver or similar tool to tighten the screws firmly.
Camera Mounting Bracket (WV-831)
Mounting adaptor
$ Preventing the camera from falling or coming off
OWhen attaching a camera to the pan/tilt head (AW-
PH300A), follow the directions in the Operating Instructions
to fix the camera firmly in position.
In addition, link the camera to the pan/tilt head using the
2. Fix the camera mounting base, pan/tilt unit, and tri-safety chain and the mounting screws to help ensure the
camera does not fall.
pod securely in the screw hole (1/4-20UNC) of the
OWhen attaching the camera on any mounting or other
camera mounting adaptor.pan/tilt head, check that the mounting can safely bear the
3. If the camera cannot be securely fixed, stick thetotal weight of the camera, lens, connection cables, etc., fix
supplied rubber sheet to the mounting adaptor,the camera firmly in position using the prescribed tool, and
take appropriate measures to prevent the camera from
then mount the camera.
falling.
-11- |
ACEC
PANASONIC
