CONSUMPTION DATATerminate the ?Rinse Hold? option:NOTES AND INDICATIONS FOR USE
Press the ?Rinse Hold? button again; the
LoadWaterEnergyApprox.programme will terminate automatically with the WATER LEVEL
ProgrammeIt may not be visible as the cycle is optimised
ProgrammeDurationfinal spin cycle for the present wash programme.for a minimum water consumption without
If you do not wish to spin the clothes, turn the
(kg)(l)(kWh)(hours:minutes)compromising washing results.
Cotton 95°5.0541.902:05programme selector knob counterclockwise to SPIN SPEED CONTROL
the ?Drain? programme.
Cotton 60°5.0490.952:25Spin speed may be reduced automatically or
Cotton 40°4.5490.602:10PROGRAMME CHANGEmay even be excluded in the case of small
Synthetics 60°2.5550.801:35loads with highly absorbent garments (e.g.
Synthetics 40°2.5550.601:25To reselect a programme when a cycle has already bathrobes, bathmat).
begun:This control avoids cloth and machine damage
Delicate 40°1.5600.600:50
Wool 40°1.0600.450:451. Switch off the appliance by pressing theand excessive vibrations and consequent noise
?ON/OFF? button.produced by the machine due to load
Silk 30°1.0450.300:45
2. Select the new programme.unbalance: by selecting high spin speeds the
Prewash cycle might increase programme duration. Consumption values were measured in normalized conditions in 3. Start the programme by pressing the noise level increases.
compliance with Standard IEC/EN 60 456.?ON/OFF? button. MOTOR NOISE
Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure
and temperature, the load and the type of wash.The running noises of the new, electronically-PROGRAMME END
controlled motor are not the same as the ones
ADD DETERGENTS, CLOSE THE DOOR SELECT ANY DESIRED OPTION1. At the end of the programme the programme you are used to from your old appliance. Don?t
?Quick Wash? buttonAND SELECT THE PROGRAMMEselector moves to the stop position. be surprised - modern technology has a
Add the detergent as described in the programme For quick, economical washes. 2. To unload the machine wait for the door to modern sound.
table or in the chapter ?Detergents and Additives? Ideal for minimum loads of lightly-soiled articles. CLEANING THE FILTER
unlock (about 1 minute).
in the booklet.Note: reduce the detergents quantity.3. Switch off the appliance, open the door and take To ensure an impeccable function of the pump,
check the filter regular and clean it if necessary.
1. Open the tap.?Half Load? buttonout the laundry.
2. Set the programme selector to the desired Reduces water consumption, above all during rinsing.4. Close the tap and leave the door ajar to allow
programme. Suitable for lightly-soiled laundry and small loads the drum to dry out.
3. Set the spin speed selector knob to the (max 3 kg).
desired speed. Note: Reduce the detergent quantity.
?Rinse Hold? button
4. Special options can be selected.
5. Check that the door is well closed and turn on The laundry remains in the last rinse water
the washing machine by pressing the without progressing to the final spin cycle to
avoid creasing and prevent colours from
?ON/OFF? button.
changing.
This option is particularly recommended for the
programme ?Synthetics? or ?Delicates?.
This function is particularly useful if you want to
postpone spinning to a later time, or if you want
to drain only.
Whirlpool is a registered trademark of Whirlpool USA
5019 301 10194 |
ACEC
WHIRLPOOL
