DisassemblyProduct Family B89
Removing and Replacing the Keypad
1.Remove the battery, antenna, light guide, rear housing, and transceiver board
assembly as described in the procedures.
2.Lift the keypad from the front housing as shown in Figure 16.
DISASSEMBLY
TOOLKEYPAD
FRONT
HOUSING
010432o
Figure 16. Removing the keypad
3.To replace, insert the keypad into the front housing, ensuring the keys align
properly with the openings in the front housing.
4.Replace the transceiver board assembly, rear housing, light guide, antenna,
and battery as described in the procedures.
Removing and Replacing the Lens Assembly
1.Remove the battery, SIM, and antenna as described in the procedures.
2.Using a Torx driver with a T-4 bit, remove the 3 screws holding the lens
assembly to the flip. See Figure 17A.
3.Carefully work the flat end of the disassembly tool under the sides of the lens
assembly at the locations shown by the arrows in Figure 17B.
26 May 15, 20016881038B20 |
ACEC
MOTOROLA
