Reserving the Next Patch (DIRECT LOAD)
In the factory default condition, patches are switched as soon as you make the selection, resulting
in an immediate change in the sound. This is called "Direct Load". If you want to change to a
distant patch (for example from patch A1 to patch E5), all the intermediate patches will briefly
change the sound, which may not be desirable. In such a case, you can reserve the patch and
cause the patch change to be delayed until confirmed by you. This function is activated as follows;
1In play mode, press the EDIT (CANCEL) key. The unit returns to the play mode, and reserving
a patch is now possible. When a new patch is
selected in this condition, the BANK/PATCH
2Use the MODULE /keys to cause the
indicator and the patch name on the display are
TOTAL module LED to light up.
flashing, but the sound does not change yet.
MODULE
COMPYDISTZNR/EQMODREVTOTALThis shows that the unit is waiting for
(ON/OFF)
confirmation from the user.
3Use the TYPE (BANK) t/skeys to causeBANKPATCHBANKPATCHBANKPATCHBANKPATCH
ListeningtoPatches(PlayModeOperation)the indication "DIRLOD" (Direct Load) toBOTH(VALUEEDITED)BOTH(VALUEEDITED)BOTH(VALUEEDITED)BOTH(VALUEEDITED)
appear on the display.
To confirm the patch change, press both t /s
This parameter determines whether the sound isfoot switches at the same time. The
switched immediately when a patch is selected. BANK/PATCH indicator and display indication
PATCH NAME
TYPE (BANK)BANKPATCH
stop flashing, and the sound of the new patch
BOTH(VALUEEDITED)(GROUP)
becomes active.
BANKPATCH
4Turn parameter knob 1 so that theBANKPATCH
BANK/PATCH indicator shows "oF". BOTH(VALUEEDITED)BOTH(VALUEEDITED)
Confirm
BANKPATCH
PARM1 knobY To return to the original operation mode, set
BOTH(VALUEEDITED)HINTHINTthe DIRLOD parameter to "on".
Y The DIRECT LOAD setting is stored
5Press the EDIT (CANCEL) key once more. automatically by the unit. There is no need to
perform any steps for storing.
Fixing the Bank (BANK HOLD)
In play mode, you can fix the bank so that only patches within that bank are switched.
1In play mode, press the EDIT (CANCEL) key. 5Keep on turning parameter knob 2 until the
BANK/PATCH indicator shows "on".
2Use the MODULE /keys to cause the
TOTAL module LED to light up. 6Press the EDIT (CANCEL) key once more.
The unit returns to the play mode. The BNKHLD
3Use the TYPE (BANK) t/skeys to cause
parameter setting is reset to "off" when the
the indication "DIRLOD" (Direct Load) to
BFX-708 is turned off and on again.
appear on the display.
PATCH NAMEWhen Bank Hold is activated, repeatedlyBANKPATCH
TYPE (BANK)
pressing s foot switch will switch patches only
(GROUP)BOTH(EDITED)
VALUE
within the current bank, as shown below.
4Turn parameter knob 2. BANKPATCHBANKPATCHBANKPATCHBANKPATCH
As soon as you operate parameter knob 2, theBOTH(VALUEEDITED)BOTH(VALUEEDITED)BOTH(VALUEEDITED)BOTH(VALUEEDITED)
display indication changes to "BNKHLD" (Bank
Hold). This parameter determines whether the
bank is fixed in play mode or not. The default
setting is "oF". Y In the Bank Hold condition, the bank can still
HINTHINT
be switched with the TYPE (BANK) t /s
PATCH NAMEBANKPATCHkeys.
PARM2 knob
BOTHEDITEDY To return to the original setting, set the(VALUE)
BNKHLD parameter to "oF".
14
ZOOM BFX-708 |
ACEC
CRATE
