Part 3: Operating InstructionsBJC-4300
3.6.2 Printing the EEPROM data
The following data recorded by the EEPROM can be printed out as described below:
1) Function setting:
Execute the self-test printouts Printer status information print.
See 3.4 Se/f-Test Printout (page 3-21).
2) Total number of sheets printed for the color and black ink cartridges respectively:
Execute the self-test print?s ASCII character printout.
See 3.4 Se/f-Test Print (page 3-21).
31 Total waste ink absorption amount:
Print out the total waste ink absorption amount as follows:
1. Install a black E%J cartridge in the printer. (The total waste ink absorption
amount cannot be printed out with the color EiJ cartridge installed.)
2. Press and hold down the POWER, RESUME button, connect the AC power cable
to the AC outlet.
3. Load a sheet of paper into the printer.
4. While pressing the RESUME button, turn on the printer. After the buzzer sounds
once, the total waste ink absorption amount will be printed out.
Figure 3-24 Sample Printout of EEPROM Data
Resetting the EEPROM will permanently erase all data contained.
3-26 |
ACEC
CANON
