CARE AND CLEANING
BEFORE CLEANING THE COOKER ALWAYSCLEANING BETWEEN THE OUTER AND
ALLOW THE COOLING FAN TO COOL THEINNER DOOR GLASS
COOKER DOWN BEFORE SWITCHING OFF THE
The outer door glass is removable for cleaning.
ELECTRICITY SUPPLY.
TO REMOVE THE OUTER GLASS
CLEANING MATERIALS
1. Open the oven door slightly to gain access to the
two cross head screws on the top of the oven
Before using any cleaning materials on your cooker,
check that they are suitable and that their use isdoor.
recommended by the manufacturer.2. Loosen the two screws using a Pozidrive
screwdriver.
Cleaners that contain bleach should NOT be used as
they may dull the surface finishes. Harsh abrasives3. Hold the door glass securely in place with one
hand, before removing the screws completely
should also be avoided.with the other hand.
4. Using both hands, gently tilt the top of the door
CLEANING THE OUTSIDE OF THEglass towards you. Lift slightly to disengage the
COOKERlocators from the two bottom brackets.
DO NOT use abrasive cleaning materials or scourers
on the outside of the cooker, as some of the finishes
are painted and damage may occur. Regularly wipe
over the control panel and oven door using a soft
cloth well wrung out in warm water to which a little
liquid detergent has been added.
5. Clean the outer and inner glass using hot soapy
water or Hob Brite Cream Cleaner. Should the
inner face of the outer door glass be heavily
soiled, it is recommended that soapy water with a
high concentration of soap is used. To prevent
streaking, a glass cleaning spray may be applied
and the glass polished with a soft cloth. DO NOT
try to clean the aluminium foil which is inside the
door. The foil is there to help keep the door cool,
DO NOT ATTEMPT TO REMOVE ANY OF THEif it is damaged it will not work. Ensure that all
CONTROL KNOBS FROM THE PANEL AS THISparts are well rinsed and thoroughly dry before
MAY CAUSE DAMAGE AND IS A SAFETYattempting to replace the outer door glass.
HAZARD.
TO REPLACE THE OUTER GLASS
1. Holding the oven glass with both hands, gently
place the locators into the holes of the brackets
at the bottom of the oven door.
2. Push the top of the oven glass towards the oven
door, ensuring the screw location holes line up.
3. Hold the glass in place with one hand and insert
the cross head screws into the location holes
with the other hand. Give the screws one turn to
ensure the glass is secure.
4. Tighten the screws positively with a Pozidrive
screwdriver before closing the oven door.
DO NOT attempt to use the oven without the glass
being in place.
43 |
ACEC
TRICITY BENDIX
