WHIRLPOOL BX20S5E Instruction Manual

?
Deepfreeze Features
Frost-Free System
Door Shelves
?
The Fresh Food and Deepfreeze sections are
? Remove door shelves by lifting ends and pulling out.
completely frost-free. Defrosting is automatic under
? Replace door shelves by placing shelf on glides and
?
normal conditions. Fresh Food and Deepfreeze sections
sliding down.
never have to be defrosted.
Automatic Ice Maker (some models)
?Make sure ice bucket is in place and ice maker arm
is down.
Door
shelf
GlideOff
position
Ice maker
arm
Adjustable Divider (some models)
On
Adjustable divider keeps items in place and adjusts to
position
meet individual storage needs. Divider fits in any door
bucket or door shelf.
?After freezer section reaches normal temperature, the
ice maker fills with water and begins operating. Allow
24-48 hours after installation before first harvest of
ice. Ice maker produces 7 to 9 harvests of ice in a
24-hour period under ideal conditions.
Adjustable
?After ice is formed, ice maker drops ice cubes into
divider
ice storage bucket. During ice production, ice maker
arm raises and lowers. When ice storage bucket is
full, ice maker arm turns ice maker off.
Note: Discard first 3 harvests of ice so any impurities left
in the water line after installation are not consumed.
?If you wish to stop automatic ice production lift ice
maker arm. A definite click is heard when proper
position is reached. Ice maker arm will remain in that
position until pushed down.
Ice Service Rack (some models)
Install ice service rack by completing the following steps
using a phillips screwdriver:
1. Loosen screw and washer on freezer side wall.
2. Place ice service rack on washers and slide down.
3. Tighten screws and washers.
Move ice service rack by completing the following steps
using a phillips screwdriver:
1. Remove ice service rack by lifting rack off washers,
then pulling out.
2. Remove screws and washers that support ice service
rack. Remove plugs from freezer wall opposite ice
service rack. Replace plugs with screws and
washers. Insert plugs in holes remaining from removal
12of screws and washers.