ASSEMBLY
BEFORE YOU START TO ASSEMBLE THE GRASS CATCHER
Some mower models may need minor modifications before you can mount the grass catcher to the unit. Look carefully
at the mower deck on your unit and compare the deck mandrel to the illustrations below. If your mower deck mandrel looks
like STYLE "A", your unit is ready - proceed with the grass catcher assembly. If your mower deck mandrel looks like
STYLE "B", go to the PREPARATION section in this manual.
DECK MANDREL
DECK MANDREL
STYLE "A"
STYLE "B"
PARTS IDENTIFICATION
COVER
UPPER CHUTEWHEEL
WEIGHT
U-BOLT
DUMP
BAG
INDICATOR
er is
nstalled.Cocntaintahineenr.
er is properlyispelanctlye. Rmeenpt claone w
ss containoemckm beangd freedq reu
WARNINGDsuob njeockct oet toped o wrater deaar mm aoanwgdee dr ud. Uetienleserio ornalytio an r. Cech
cra
CHUTE LATCH
.Cocntainer is
erlyisnstalledepnt claoen wtahineenr.
tainer isk propde frde rqeuepnlatlyce. Rme
lessra conly an r. Cehcoemcm beang
WDsoAcu nraboRcjet oNkcet topINed o wraGr deteaa mmr aoagndwe der ud. Uetiensre oiontio
GRASSLOWER CHUTE
CATCHERATTACHING
CONTAINERSLOWER CHUTESTRAPS
NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the tractor,
in the operator's position.
(1) 3/8" Wrench(1) Drive Ratchet
(1) 1/2" Socket(1) 3" or longer Extension
THESE ARE THE TOOLS YOU WILL NEED TO
(1) 9/16" Socket(1) Short Handle
ASSEMBLE YOUR GRASS CATCHER:
Phillips Screwdriver
CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO TRACTOR:
Depress clutch/brake pedal fully and set parking brake.
Place gearshift/motion control lever in neutral (N) position.
Place attachment clutch in "DISENGAGED" position.
Turn ignition key "OFF" and remove key.
Make sure the blade and all moving parts have completely stopped.
Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with
plug.
6 |