SpecificationsFrequency Response Curves
Type:1-inch dual diaphragm pressure Omni-
gradient microphonedirec-
Polar patterns:omnidirectional, cardioid, tional:
hypercardioid
Sensitivity at 1000 Hz:25 mV/Pa (-32 dBV ?2 dB)
Frequency range:20 to 20,000 Hz (refer to frequency
response curves)
Electrical impedance:d 200 ohms
Recommended load impedance:e 1000 ohms
Bass cut filter slope:12 dB/octave below 100 HzCardioid:
Preattenuation pad:-10 dB, switchable
Equivalent noise level
to DIN 45 405 (CCIR 468-2):22 dB
Equivalent noise level
to DIN 45 412 (A-weighted):8 dB-A
Signal/noise ratio re 1 Pa
(A-weighted):86 dB*)
Max. SPL for 0.5% THD (0/-10 dB):350/1000 Pa 145/155 dB SPL*)
Dynamic range:137 dB (A-weighted)*)Hyper-
Environment:- temperature: -10!C to +60!Ccardioid:
- (14!F to 140!F)
- relative humidity: 90% (+20!C/68!F),
85% (+60!C/140!F)
Power requirement:9 to 52 V phantom power
to DIN 45 596/IEC 268-15
Current consumption:d 2 mA
Connector pinout:3-pin male XLR to IEC standard
Size:max. dia.: 58 mm (2.3 in.), Polar Patterns
length: 183 mm (7.2 in.)
Net weight:450 g (1 lb.)OmnidirectionalCardioidHypercardioid
*) Values for 48 V phantom power; reduce by 6 dB for 24 V and 18 dB for
12 V phantom power.
This product conforms to standards EN 50 082-1 and EN 60 065.
7 |
ACEC
OTHERS
