MX-GA3V(US).book Page 27 Thursday, April 10, 2003 9:45 AM
Using the Timers
When the timer ON-time comes:
Using the Unit
You can set the time in the same way as for setting the Daily Tim- When the timer ON-time comes, the System automatically
English
er.turns on. The station you have set is played. The Timer indica-
tor () blinks during timer operation.
1Insert a blank or erasable tape into the DeckTo stop timer recording, press the 7 button.
B and wind past the tape leader. When the timer OFF-time comes, ?OFF? blinks on the display
just before the OFF-time and the System automatically turns
2Press the CLOCK/TIMER button until ?ONoff.
TIME? immediately after ?REC? appears on
the display.
Then, the ?REC? indicator blinks on the display. The REC Timer works even if the System is turned on.
Each time you press the button, the display changes as follows:
Set the REC timer setting time considering one or more
DAILY = ON TIME = REC = ON TIME* = Clock setting
display = (back to the beginning)minutes allowances.
* : This item should be selected for the REC Timer setting.
Turning the REC (Recording) Timer On and Off
After 2 seconds, the System enters ON-time setting mode. The cur-
rent ON time appears on the display and the hour digits blink.Once you have set the REC Timer to record a source, the timer set-
ting is stored in memory. So, recording will be made at the set time
everyday unless you cancel the REC Timer.
To cancel the REC Timer temporarily:
After 2 secondsREC
1Press the CLOCK/TIMER button on the Unit
repeatedly until ?REC? appears on the dis-
play.
REC
2Press the CANCEL button on the Unit.
?OFF? appears and the ?REC? indicator goes out.
3Setting the ON time you want the System to
turn on.To activate the cancelled REC Timer:
1. Press the 4 or c button to set the hour, then press the
1Press the CLOCK/TIMER button on the Unit
SET button.
repeatedly until ?REC? appears on the dis-
2. Press the 4 or c button to set the minute, then press the
play.
SET button.
?OFF TIME? appears for 2 seconds, and the System entersThe ?REC? indicator also blinks on the display.
OFF-time setting mode. The current OFF time appears on the
display, and the hour digits blink.2Press the SET button on the Unit.
The ?REC? indicator remains lit. Each setting already made
4Setting the OFF time you want the System toappears on the display in the order of ON time, OFF time, and
the preset number, and then the display returns to the original
turn off.
display.
1. Press the 4 or c button to set the hour, then press the
SET button.
CAUTION:
2. Press the 4 or c button to set the minute, then press the
SET button. If the System is unplugged, or a power failure oc-
The System enter Preset Station Entering mode.curs, the timer setting loses its setting immedi-
ately. You will need to reset the clock first, then
5Select the preset station for recording.the timer.
1. Press the 4 or c button to set the band (TUNER FM or Once the REC Timer has been set, recording will
TUNER AM), then press the SET button.
be repeatedly made at the set time everyday.
2. Press the 4 or c button to set the preset number, then
To use the REC Timer once, cancel the REC Tim-
press the SET button.
er after you have finished recording with the
The REC indicator stops blinking and remains lit.REC Timer.
Each setting you have made appears on the display in the order
of ON time, OFF time, radio band and the preset number.
6Press the %%%% STANDBY/ON button to turn
off the System, if necessary.
To change the timer setting, repeat the setting procedure from
the beginning.
27 |
ACEC
JVC
