To set the Timer to turn on the air conditioner, changing
Temperaturethe previous settings:
1. Turn on air conditioner.
Press the plus button to raise the temperature. Display shows
2. Adjust Mode to Cool, Fan Only, or Power Saver.
the temperature control setting. Each time you press or hold
the plus button, the temperature will increase 1o until it 3. Adjust Fan Speed to Turbo, High, Low or Auto.
reaches 86°F (30°C).4. Adjust temperature between 64°F (18oC) and 86°F (30oC).
NOTE: After 3 seconds, display will show the current room 5. Wait 3 seconds before turning off air conditioner.
temperature.6. Press TIMER. Timer indicator light will flash. Display will show
remaining hours before air conditioner will turn on.
7. Press the plus or minus button to change delay time (1 to
24 hours).
8. Press TIMER again or wait 10 seconds. Timer indicator light
will remain on. Display will show current room temperature.
To clear Timer delay program:
NOTE: Air conditioner can be either on or off.
Press the minus button to lower the temperature. Display
Press and hold TIMER for 3 seconds. Timer indicator light will
shows the Temperature control setting. Each time you press
shut off.
or hold the minus button, the temperature will decrease 1o
until it reaches 64°F (18°C).
To see or change the remaining time (in hours):
NOTE: After 3 seconds, display will show the current room
1. Press TIMER once after it has been programmed. Display will
temperature.
show remaining time.
2. While the display is showing the remaining time, you can
To change the temperature display from °F to °C:
press the plus or minus button to increase or decrease the
1. Turn off the air conditioner.
time.
2. While the air conditioner is off, press and hold down the
3. After 10 seconds, display will show the current room
MODE and FAN SPEED buttons while pressing POWER to
temperature.
turn on the air conditioner.
NOTE: Follow these same steps to change the temperature
To operate air conditioner with remote control
display from °C to °F.
NOTE: Remote control may vary in appearance.
Timer delay
To set the Timer for a 1- to 24-hour delay until the air
conditioner turns off (the air conditioner must be On):
1. Press TIMER. Timer indicator light will flash. Display will show
remaining hours before air conditioner will turn off.
2. Press the plus or minus button to adjust the delay time (1 to
24 hours).
3. Press TIMER again or wait 10 seconds. Timer indicator light COOLFANFAN
will remain on. Display will show the current room SPEED
temperature.
AUTO
Power saver
TIMER
To set the Timer to turn on the air conditioner, keeping
previous settings:
1. Turn off air conditioner.
2. Press TIMER. Timer indicator light will flash. Display will show
remaining hours before air conditioner will turn on.
POWER
3. Press the plus or minus button to change delay time (1 to
24 hours).
4. Press TIMER again or wait 10 seconds. Timer indicator light
will remain on. Display will show current room temperature.NOTE: Two AAA batteries (included) power the remote control.
Replace batteries after 6 months of use, or when the remote
control starts to lose power.
12 |
ACEC
WHIRLPOOL
