33057-GB.fm5 Page 20 Monday, January 18, 1999 7:21 PM
INSTALLATION
Install the appliance away from heat sources.
Place the appliance in a dry, well ventilated
place.
Make sure that the appliance is level.
Adjust the front feet if necessary.
Leave at least 5 cm clearance above the
appliance.
The sides of some models are extended at
the rear so the appliance can be placed
against the rear wall. Otherwise, fit the
spacers (if supplied) on the upper part of the
condenser at the rear of the appliance.
For models without lateral walls, the distance
between the unit and the wall must be at least
4.5 cm.
Clean the inside (see "Care and
maintenance").
Fit the accessories supplied.
Electrical connection
Electrical connections must be made in
accordance with local regulations.
Ensure that the voltage indicated on the
appliance rating plate corresponds to the
domestic supply voltage.
Appliance earthing is compulsory by law.
The Manufacturer declines all liabilities
for injury to persons and animals or
damage to property resulting from failure
to observe these regulations.
If the plug and socket are not of the same
type, have the socket replaced by a qualified
electrician.
Do not use extension cables, multiple sockets or
adapters.
20 |
ACEC
IGNIS
