Presentation of the refrigerator-freezer
1. Turn the thermostat knob/s to ?0?.
2. Tilt the appliance backwards to access
screws 1, 2 and 3 of the lower hinge (fig. 2).
Unscrew using an 8 mm socket wrench.
Remove the hinge and then the freezer door.
Fig. 2
3. Leaving the door of the refrigerator
open,unscrew screws 4 and 5 (fig. 3), using a
cross head screwdriver, remove the hinges,
and then the refrigerator door.
Fig. 1
Door reversibility
The direction of door opening can be changed.
How to proceed:
Disconnect the appliance from theFig. 3
power supply.
Empty the appliance and remove4. Remove the plastic protections that cover
the fixing holes on the left of the middle
grids and baskets.hinge and fit the new plastic protections
supplied on the opposite side.
5. Unscrew upper pin 6 (fig. 4), using a 6 mm
Put a protection (cloth, carton) on the floorpipe wrench and then screw it on the
and place the items on it, so that the doors are notopposite side.
ruined when they are being removed6. Remove the upper pin on the refrigerator
door and the support-cover 7 (fig. 5), located
on the opposite side. Reverse the elements.
(Same procedure as for freezer door).
15
63733036_gb.p651513/06/2002, 10:40 |
ACEC
IGNIS
