CCD-TRV107E/TRV108E/TRV208E/TRV408E
3. Flange Back AdjustmentRadarWRadarWRadarWRadarWRadarW3-2.Flange Back Adjustment (2)
(Using Flange Back Adjustment Chart and SubjectPerform this adjustment after performing OFlange Back Adjustment
More Than 500m Away)(1)�.
The inner focus lens flange back adjustment is carried out
SubjectSubject more than 500m away
automatically. In whichever case, the focus will be deviated during
(Subjects with clear contrast such as
auto focusing/manual focusing.
buildings, etc.)
Measurement PointCheck operation on TV monitor
3-1.Flange Back Adjustment (1)
Measuring Instrument
SubjectFlange back adjustment chart
Adjustment PageF
(2.0 m from the front of the protection
glass)Adjustment Address46 to 55, 58
(Luminance: 200 ? 30 lux)
Note1: Check that the data of page: 6, address: 02 is O00�. If not, to page:
Measuring Instrument Adjustment remote commander6, address: 01, set data: 00, and press the PAUSE button.
Adjustment PageFNote2: Make the lens horizontal and perform this adjustment.
Adjustment Address46 to 55, 58
Switch setting:
Note1: Check that the data of page: 6, address: 02 is O00�. If not, to page:NIGHT SHOT (Lens block) ............................................OFF
6, address: 01, set data: 00, and press the PAUSE button.
Note2: Make the lens horizontal and perform this adjustment.Preparations:
Note3: 1/4 CCD model: CCD-TRV408E1) Set the zoom lens to the TELE end and expose a subject that is
1/6 CCD model: CCD-TRV107E/TRV108E/TRV208E
more than 500m away (subject with clear contrast such as
building, etc.). (Nearby subjects less than 500m away should
Switch setting:
not be in the screen.)
NIGHT SHOT (Lens block) ............................................OFF
Adjusting method for 1/4 CCD model:
Adjusting method for 1/4 CCD model:
Order Page Address DataProcedure
Order Page Address DataProcedure
100101Set the data.
100101Set the data.
2F86Write down the data.
2F86Write down the data.
3F8600 Set the data and press PAUSE button.
3F8600Set the data and press PAUSE
button.460113 Set the data, and press PAUSE button.
460113Set the data, and press PAUSE5Place a ND filter on the lens so
button.that the optimum image is obtain.
560115Set the data, and press PAUSE660129 Set the data, and press PAUSE button.
button.7602Check that the data changes to
6602Check that the data changes toO01�. (Note3)
O01�. (Note4)8F86Set the data that is written down
7F86Set the data that is written downat step 2 and press PAUSE button.
at step 2 and press PAUSE button.
Note3: The adjustment data will be automatically input to page: F, address:
46 to 55, 58.
Note4: The adjustment data will be automatically input to page: F, address:
46 to 55, 58.
Adjusting method for 1/6 CCD model:
Adjusting method for 1/6 CCD model:Order Page Address DataProcedure
Order Page Address DataProcedure100101Set the data.
100101Set the data.260113 Set the data, and press PAUSE button.
260113Set the data, and press PAUSE3Place a ND filter on the lens so
button.that the optimum image is obtain.
360115Set the data, and press PAUSE460129 Set the data, and press PAUSE button.
button.
5602Check that the data changes to
4602Check that the data changes toO01�. (Note3)
O01�. (Note4)
Note3: The adjustment data will be automatically input to page: F, address:
Note4: The adjustment data will be automatically input to page: F46 to 55, 58., address:
46 to 55, 58.
Processing after Completing Adjustments:
Processing after Completing Adjustments:
Order Page Address DataProcedure
Order Page Address DataProcedure
160100 Set the data, and press PAUSE button.
160100Set the data, and press PAUSE
200100Set the data.
button.
3Turn off the power and turn on again.
2Turn off the power and turn on
4Perform OFlange Back Check�.
again.
3Perform OFlange Back Adjustment
(2)�
5-14 |
ACEC
SONY
