3Connect the other end of the line cordto
the telephone line socket and the other end3Getting started
of the power cable to the electricity socket
3.1Connect the base station
Caution
Avoid placing the base station too close to large
metal objects such as filing cabinets, radiators or
electrical appliances. This can impair the range
and sound quality. Buildings with thick internal
and external walls may impair transmission of
signals to and from the base.
!WarningNote
The line adaptor may not be attached to thePower is applied when the power adaptor is
line cord. In this case, you have to connect theplugged into the unit and connected to the
line adaptor to the line cord first before
plugging the line cord to the line socket.electricity socket. The only way to power down
the unit is to unplug the power adaptor from
the electricity socket. Therefore, ensure that the
3.2Install rechargeable batterieselectricity socket is easily accessible.
Your CD440 is supplied with two rechargeableThe power adaptor and the telephone line cord
have to be connected correctly, as incorrect
batteries. Before using the handset, install theconnection could damage the unit.
batteries into the handset and fully charged
them up.Always use the telephone line cord supplied
1Slide out the battery coverwith the unit. Otherwise, you may not get a dial
tone.
1Insert the plug of the power cord into the
socket under the base station
2Place the batteries as indicated in the
battery compartment and replace the
battery cover2Insert the plug of the line cordinto the
3.3Place the handset on the chargingsocket under the base station
cradle
When the battery is fully charged, the talk time
of your phone is approximately 12 hours and
the standby time is approximately 150 hours.
1Place the handset on the charging cradle of
the base station
2Leave it there until the batteries are fully
charged
Getting started9 |
ACEC
PHILIPS
