TROUBLESHOOTINGMAINTENANCE
Error codesCleaning the front panel
In the following cases the corresponding errorWhen the front panel is soiled, wipe the surface
code indication appears. Follow the suggestionsof the panel with a soft, dry cloth.
Cleaning the connectorbelow to solve the problem. If the error code
The connector on the reverse side of the frontindication does not disappear, consult an AIWA
panel needs to be cleaned occasionally. Wipeservice center.
the surface of the connector with a cotton swabERROR01The disc magazine is not properly
slightly moistened with alcohol.inserted in the CD changer. Reinsert
the magazine. Refer to the
instruction manual for the CD
changer.
ERROR02No CDs are loaded in the disc
magazine. Insert CDs properly.
Refer to the instruction manual for
the CD changer.
ERROR03Focus error. Check that the discs
are loaded properly in the disc
If the display is distorted in any way, cleaning themagazine (right side up, etc.).
connector is recommended.ERROR04Problem with the CD changer. Reset
the unit by pressing the Reset button.
If this does not solve the problem,
consult an AIWA service center.
ERROR05The CD changer is overheated.
Allow the changer to cool off by
moving the vehicle out of direct
sunlight.
Reset button
The Reset button is visible when you detach the
front panel. Try pressing this button if this unit or
the CD Changer (if connected) does not operate
properly. When you press this button, use the tip
of a pointed object such as a pencil or toothpick.
Note that all your settings stored in memory,
however, will be erased if you press this button.
Reset button
ENGLISH 22
01_CDCMP3(YU)E2300.11.22, 11:40 AM
tousi-E-23 |
ACEC
AIWA
