RECORDING
Y If DOES NOT FIT appears on the display, there is not
High speed recording from internal CD player
enough recording space left on the CDR(W) disc.
You can press RECORD: only complete tracks that still fit on
CANCEL/DELETEEASY JOGSTORE/
CDMENUthe CDR(W) will be recordedEnglish
or
ENTER
You can press PROG to select one or more tracks for
recording (see programming):
OPEN / CLOSEOPEN / CLOSEPLAPLAY / PY / PAUSEAUSESTOPSTOP- rotate the EASY JOG/ENTER key to the required track
TYPERECRECORDFINALIZEERASESOURCEEXT
CDRnumber, then press the key (or ENTER on the remote
control)
or
ANALOGRW- directly select the track number via the 10-keypad on the
CDR 77X AUDIO CD RECORDER
remote control, then press the ENTER key to confirm yourPROGSHUFFLEDISPLAYSCROLLPHONES
REPEATDJ MODE
selection and go to the next step.
Start high speed recording
During high speed recording the sound is not audible.
1 To start recording press RECORD.
Preparing for high speed recording
� WAIT lights up. The display shows the total remaining
1 Make sure that the recording disc is absolutely free oftime for the selected recording. High-speed recording
starts. f RECORD g lights up continuously.
scratches and dust particles.
2 To choose the type of recording, press REC TYPE:YTo check the track number and track time, press DISPLAY.
This can be done during recording.
once:to select �RECORD FASTO if you wish to make a
fast recording of a disc or programmed tracks;
YRecording will stop automatically.
three times:to select �MAKE CDO if you wish to make a
fast recording of a disc or programmed tracks
Note: Copy prohibited tracks will be copied analog. ANALOG
and to automatically finalize the recording. Also
REC is displayed.
see �Finalizing CDR & CDRW discsO.
� The display first shows the selection.
2 To stop recording manually, press STOP.
The f RECORD g label starts blinking. After 3
� UPDATE lights up, f RECORD g goes out and
seconds the display shows the remaining CDR(W)
recording time on the left and total time of source on therecording stops. (Minimal track length must be 4 seconds
otherwise silence will be added to the track.)
right. (every 2 seconds PRESS RECORD is displayed.)
The left-hand selection indicator is lit up.
YIf STOP was pressed within 3 seconds after RECORD, noREM REC TIME TRACKTOTAL REMTRACK TIMESTEP
recording will take place.
SYNCMANUALRECORDPROGAfter recording, the display shows UPDATE for several
DIGITALICDCHANGERCDSHUFFLEALL
OPTICALRWRWIREPEAT
ANALOGSCANTRACKseconds. The Total time indications can differ slightly.
However, no music information is lost.
REM REC TIME TRACKTOTAL REMTRACK TIMESTEP
Note: In this Recording mode, the Pause function is not
operative.
SYNCMANUALRECORDPROG
DIGITALICDCHANGERCDSHUFFLEALL
OPTICALRWRWIREPEAT
ANALOGSCANTRACKImportant:
If you want to play the recorded CDR disc on any
REM REC TIME TRACKTOTAL REM TRACK TIMESTEPregular CD player, it must first be finalized. See
finalizing discs.
SYNCMANUALRECORDPROG
Finalized CDRW discs play only on CDRW compatible
ICDCHANGERCDSHUFFLE ALLDIGITAL
RWRWOPTICALIREPEAT
ANALOGSCAN TRACKCD players.
19 |
ACEC
PHILIPS
