5 � RecordingNManually updating the track number
Manually updating the track Rec mute
number
This function makes it easy to record a silent interval.
To do so, press the remote control unit REC MUTE
If you want to update the track number manually, pro-
ceed as follows.button during recording.
ENGLISH1
REC MUTE button
2
1Take the following steps to enable manual
track number updating.
1As described in OBasic operation in Menu
mode� (? p.12), access the OM_TR INCR?�
menu item and press the ENTER button.The display will indicate ORec Mute� and muted
The display will indicate OTR_INCR> XXX� recording will begin. After approximately four sec-
onds, the recorder will enter record-ready mode.
(you can select ON or OFF).
2Turn the MULTI JOG dial to select ON.Note
The rec mute function can be controlled only from the
3Press the MENU button or the ENTER but-remote control unit.
ton to exit menu mode.
2Press the (record) button at the point
where you want to assign a track number.
The track number will be updated.
Note
This button is disabled while track number 99 is being
recorded.
30 |
ACEC
MARANTZ
