PLAYINGPROGRAMMING
English
3 Repeat step 2 for all tracks to be programmed.
Repeat CD, track or program
4 Press STOP or PROGRAM to end programming.
1 Press REPEAT one or more times during CD play.
�PROGRAM lights continuously.
� When REPEATTRACK lights up, the current track plays
repeatedly. When REPEATALL lights up, the disc or
5 Press PLAY/PAUSE 2; to start programmed play.
program plays repeatedly.
Note:
REMREC TIME TRACKTOTAL REM TRACK TIME FADESTEP- To review the program, press PROGRAM, followed by 5 or
6 with the CD recorder in Stop mode.
12 3 4 5 6 7 8- To add more tracks to the program, repeat steps 1 to 5.
DIGITALIIPROGRAMMANUAL SYNCSCAN- If you try to store more than 99 tracks, PROG FULL
OPTICALICD
ANALOGRWSHUFFLE REPEAT TRACKALL
appears on the display.
2 To return to normal play, press REPEAT one or more times
Clearing a program
until:
� The REPEAT label disappears from the display.
1 Press STOP 9 if necessary to stop programmed play.
Note:
2 Press STOP 9 again to clear the program.
- You can use shuffle in combination with REPEATALL or
�PROGRAM disappears from the display.
programmed play.
- REPEAT is also cleared if you open the disc tray.
YThe program is also cleared if you open the disc tray.
Erasing a track from a program
Remarks about programming
1 In Stop mode press PROGRAM to enter Program mode.
YYou can program up to 99 tracks to play in any desired
2 Use 5 or 6 to select the track from which to delete.
sequence.
� The track number and program step will be shown on
the display.
YTracks can be programmed more than once, but each time
counts as a track (STEP).
3 Press CANCEL to erase the track from the program.
� The remaining program steps and the remaining playing
Programming
time of the program will be displayed.
1 In Stop mode press PROGRAM to enter Program mode.
�PROGRAM flashes and PROGRAM appears on the display.
REMREC TIME TRACKTOTAL REM TRACK TIME FADESTEP
12 3 4 5 6 7 8 9 10 11
DIGITALI IPROGRAMMANUAL SYNCSCAN
OPTICALICD
ANALOGRWSHUFFLE REPEATTRACKALL
2 Select the required track numbers by turning the EASY
JOG/ENTER key left or right and store by pressing ENTER.
REMREC TIME TRACKTOTAL REM TRACK TIME FADESTEP
27 811
DIGITALI IPROGRAMMANUAL SYNCSCAN
OPTICALICD
ANALOGRWSHUFFLE REPEATTRACKALL
or:
Key in a track number with the number keys. For 2-digit
numbers, press the keys in rapid succession.
� The track will be stored in the program.
� The track number, total program time and the number of
programmed tracks (STEPS) are displayed.
22 |
ACEC
PHILIPS
