Initialization
Machine initialization procedure
For CE-7000, TK-7000/7500, TK-6000/6500, TK-T500
Note: If your register has the clerk lock, be sure to pull out the clerk key.
1. Plug the power cord into an AC outlet.
REG2 X1
REG1Z1
OFFX2/Z2
2. Set the mode switch to OFF position.
RF
PGMREG2 X1
REG1Z1Initialization
RECEIPT
3. While holding down j, set the mode switch to PGM.FEEDOFFX2/Z2
RF
PGM
4. Release j.
You should see O0000000000� on the display.
If 10 zeros are not shown or another character are shown,
RECEIPTJOURNAL
FEEDFEED
immediately set the mode switch to OFF and restart from
the beginning of this procedure.
5. Enter 11-digit program code from the worksheet.
DDDD ~ DDD s
111098321
6. Press s to register the program code. (refer to Initialize 1)
(Wait until beep twice.)
7. In case of installing inline system,
enter 3-digit program code from the worksheet.
(For TK-6000/6500 without inline option, do NOT enter any value.)
DDD s
321
(refer to Initialize 2)
8. Press s to register the program code.
After completion of initialization and program
loading, initialization receipt is issued.
Please turn on and initialize the register in order, if your registers are connected with inline.
The ID number of registers are defined automatically.
(Do NOT turn off the register(s) until all register has been initialized.)
- Version 1.0.1
CE-7000/TK-7000/TK-7500/TK-T500/TK-6000/TK-6500 Dealer's Manual23 |
ACEC
CASIO
