Installation Guide (continued)
Battery
Connect the yellow battery lead to the correctO Final Installation
radio wire or to the battery fuse port on the fuseLead Connections
block.Connect all wires, making sure that each
connection is insulated and secure. Bundle all
loose wires and fasten them with tape so they
Antennawon't fall down later. Now insert the stereo unit
Connect the antenna by plugging the antennainto the mounting collar.
lead into the antenna receptacle.
Congratulations! After making a few final checks,
you're ready to enjoy your new auto stereo
Equipmentsystem.
Connect any optional equipment such as
amplifier, according to the instructions furnished
with the equipment. Keep about 12 inches (30
cm) of distance between the speaker
cords/amplifier unit and the antenna/antennaO Final Checks
extension cord. Read the operating and1. Make sure that all wires are properly
connected and insulated.
installation instructions for any equipment you2. Make sure that the stereo unit is securely
will connect to this unit.held in the mounting collar.
3. Turn on the ignition to check the unit for
proper operation.
Accessory (ACC) Power
Connect the red power lead to the correctIf you have difficulties, consult your nearest
vehicle radio wire or to the appropriate fuse portauthorized professional installer for assistance.
on the fuse block.
If the stereo unit functions properly with all these
connections made, disconnect the wires and
proceed to the final installation.
21 |
ACEC
PANASONIC
