Connections
[Connection Example]
Phones/Output Terminal
Before connecting phones or other external equipment, be
sure to first turn down the volume settings of the keyboardPIN plug (red)PIN jack
and the connected equipment. You can then adjust volumeTo keyboardOs INPUT 1
to the desired level after connections are complete.PHONES/OUTPUT INPUT 2
terminal
PIN plug (white)
[Rear Panel]Stereo standard plugStandard plugKeyboard or
guitar amp
PHONES/OUTPUT terminal
Audio connectionNOTE
Y You can also connect the keyboardOs MIDI terminal to a
computer or sequencer. See OMIDI� on page E-30 for
1details.
Stereo standard
plug
3
Sustain jack Terminal
Keyboard amp, WhiteRedPIN plug
guitar amp, etc.
2LEFT RIGHTYou can connect an optional sustain pedal (SP-3 or SP-20) to
AUX IN or similar terminalthe SUSTAIN jack terminal to enable the capabilities
of audio amplifier
described below.
SUSTAIN jack Terminal
Connecting Phones (Figure 1)
Connecting phones cuts off output from the keyboardOs built-
in speakers, so you can play even late at night without
disturbing anyone.
Audio Equipment (Figure 2)
Connect the keyboard to a audio equipment using a
commercially available connecting cord with a standard plug
on one end and two PIN plugs on the other end. Note that
the standard plug you connect to the keyboard must be a
SP-20
stereo plug, otherwise you will be able to output only one of
stereo channels. In this configuration, you normally set the
input selector of the audio equipment to the terminal (usually
Sustain Pedal
marked AUX IN or something similar) where the cord from
Y With piano tones, depressing the pedal causes notes to
the keyboard is connected. See the user documentation that
linger, much like a pianoOs damper pedal.
comes with your audio equipment for full details.
Y With organ tones, depressing the pedal causes notes to
continue to sound until the pedal is released.
Musical Instrument Amplifier (Figure 3)
Use a commercially available connecting cord* to connect the
keyboard to a musical instrument amplifier.
Accessories and Options
* Be sure to use a connecting cord that has a stereo standard
plug on the end you connect to the keyboard, and aUse only the accessories and options specified for this
keyboard. Use of non-authorized items creates the danger of
connector that provides dual channel (left and right) input
fire, electrical shock, and personal injury.
to the amplifier to which you are connecting. The wrong
type of connector at either end can cause one of the stereo
channels to be lost.
When connected to a musical instrument amplifier, set the
volume of the keyboard to a relatively low level and make
output volume adjustments using the amplifierOs controls.
627A-E-017AE-15 |
ACEC
CASIO
