Other Useful Features
Adjusting Source Signal Levels
BAND/TEL.MUTE/SETUP
If the difference in volume level between FM radio
and other sources is too great, adjust the FM
signal level as follows.
1When the monitor is open, press and hold
MUTE/SETUP for at least 2 seconds. The
SETUP screen appears.
Preset 52Press preset 4 to select the RADIO setting
mode. Press preset 4 again to select FM
Preset 6
LEVEL.
gggggfffffPreset 43Press g or f to select the FM signal level
HIGH or LOW to make the signal levels between
the FM band and other sources closer.
Switching the Tuner ModeFor any other settings, press preset 4 or another
preset button.
The CVA-1004R incorporates the MAX TUNE
4After setting is completed, press MUTE/SETUP
PRO for the highest quality tuner audio. Moreover,
to return to normal mode.
you can choose between three settings to suit
your personal preferences.
Subwoofer Control On and Off
1When the monitor is open, press and hold1When the monitor is open, press and hold
MUTE/SETUP for at least 2 seconds. TheMUTE/SETUP for at least 2 seconds.
SETUP screen appears.
2Press preset 5 to set to the SYSTEM setting
2Press preset 4 to activate the RADIO settingmode. Press preset 5 again to select the
mode. Press preset 4 again to select FMSUBWOOFER mode.
CONDITION.
3Press g or f to select Subwoofer ON or
OFF.
3Press g or f to select the desired setting.
For any other settings, press preset 5 or another
NORMAL: Standard setting
preset button.
HI-FI: Sound quality priority setting
STABLE: Noiseless priority setting
4After setting is completed, press MUTE/SETUP
For any other settings, press preset 4 or anotherto return to normal mode.
preset button.
NOTES
" Initial mode is "SUBWOOFER ON."
4After setting is completed, press MUTE/SETUP" Set to "SUBWOOFER OFF" unless the subwoofer is
to return to normal mode.used.
" When the subwoofer is turned on, the subwoofer
output level can be adjusted. For more details, refer to
the Adjusting Volume/Balance/Fader (page 8).
44-EN |
ACEC
ALPINE
