CX51K4 CX51K3
FUNCTION OPERATION CHECKING (VIDEO AND AUDIO)FUNCTION OPERATION CHECKING (VIDEO AND AUDIO)
NO. Adjustment partAdjusting procedure and conditionsWaveform and others(Continued)
1CONTRAST1. Receive "Monoscope Pattern" signal.NO. Adjustment partAdjusting procedure and conditionsWaveform and others
key2. Set P-Mode to select CONTRAST.
3. Press Volume Up/Down key to check whether9Colour1. Receive the "PAL COLOUR BAR" signal, press
the CONTRAST effect is OK or not.systemthe COLOUR SYSTEM key to select modes
except PAL, check the COLOUR is not working
properly. Then, select the "PAL" mode. Check
2COLOUR key1. Receive "Colour Bar" signal.again its colour so that it is working properly.
2. Set P-Mode to select COLOUR.2. Receive "NTSC 4.43" signal, press COLOUR
3. Press Volume Up/Down key to check whetherSYSTEM key to select modes except NTSC
the COLOUR effect is OK or not.4.43, check the COLOUR is not working
properly. Then, select the "NTSC 4.43" mode.
Check again its colour so that it is working
3BRIGHTNESS1. Receive "Monoscope Pattern" signal.properly.
key2. Set P-Mode to select BRIGHTNESS.3. Receive "NTSC 4.43/3.58 COLOUR BAR" sig-
3. Press Volume Up/Down key to check whethernal thru AV, press COLOUR SYSTEM key to
the BRIGHTNESS effect is OK or notselect modes except N4.43/3.58, check the
COLOUR is not working properly. Then, select
the "NTSC 4.43/3.58" mode. Check again its
4TINT key1. Receive the "NTSC Colour Bar" signal thru AV
colour so that it is working properly.
in.
2. Set P-Mode to select TINT.
3. Press Volume Up/Down key to check TINT, UP
for GREEN direction and DOWN for PURPLE
direction whether is OK or not.
5SHARPNESS1. Receive "Monoscope Pattern" signal.
Key2. Set P-mode to select SHARPNESS.
3. Press Volume Up/Down key to check whether
10
the SHARPNESS effect is OK or not.10 NOISE MUTE1. Receive "PAL COLOUR BAR" signal.
CHECKING2. Turn up the volume control to maximum, make
sure the sound is heard from the speakers.
6CH DISPLAY1. All Ch (1~99) will have an OSD display of theThen put the unit in no signal state.
COLOURchannel number in green colour under AFT ON3. Check the sound mute is effective.
condition.4. Finally turn sound level of CTV to minimum.
7NORMAL Key1. Once in PICTURE Mode, and the NORMALNote:If nothing is display mean
key is pressed, all the settings will be presentcontrast, colour, bright, tint
to normal setting.or sharpness are all in nor-
(Normal setting value for every mode).mal setting.
? CONTRAST: MAX11 OSDCheck OSD LANGUAGE quantity and type as
LANGUAGEEnglish, Russian, Chinese, French, Arabic and
? COLOUR: CENTER
QUANTITYMalay.
? BRIGHTNESS : CENTER
? TINT: CENTERCHECK
? SHARPNESS : CENTER
8White Temp1. Receive "Monoscope Pattern" signal.
2. Set FUNCTION to select WHITE TEMP.
3. Press Volume Up/Down key to check WHITE
TEMP Option, STANDARD:
NORMAL SETTING, WARM for more
REDDISH direction changing, COOL for more
BLUISH direction changing.
10-110-2 |
ACEC
SHARP
