Operating Instructions
Connecting the DVD-Additional connections
Recorder
You can connect your DVD Recorder to the televisionYou can connect your DVD Recorder to a satellite or
using the SCART cable if the appropriate input is
digital tuner.
C
available on the television. onnecting & Setting UP
1. Connect the RF cable as shown.
2. Connect one end of the SCART cable to the AV1
socket on the rear of the DVD Recorder.
3. Plug the other end into the appropriate connector on
the television.
4. Plug in the DVD Recorder and TV
5.Turn on the DVD Recorder and TV.external device
(VCR/Satellite receiver)
6. Press the INPUT SEL. button on your TV remote
control until the Video signal from the DVD Recorder
appears on the TV screen.
To RF IN
- DVD mode
1. Connect the AV2 connector of DVD Recorder and
To TVVCR/Satellite receiver or digital tuner using a SCART
cable.
2. Connect the AV1 connector to the SCART AV
connector on TV.
RF Cable
3. Turn on the DVD Recorder, VCR/Satellite receiver or
digital tuner and TV.
To ANT INPUT
4. Set Input mode on AV2.
- TV mode
1. Press the TV/DVD button on remote control,then
 The RF cable connection of this product
TV appear on Front LED display. (or turn off DVD
sends only signals of TV.
NOTERecorder.)
You must connect SCART cable or
Audio/Video cables to watch a DVD from2. You can watch programmes from a satellite or digital
your DVD Recorder.tuner connected to this DVD Recorder, even when
the DVD Recorder is turned off.
 TV mode
Press the TV/DVD button on remote
control, then TV appear on Front LED
display (or turn off DVD Recorder).
Then you can watch programmes
received through RF cable.
12-5 |
ACEC
TOSHIBA
