Your Dynasty grill has optional top burners equipped
with rotary igniter knobs for lighting.
Lighting The Open Burners
Remove the burner cover, if any, or any cooking
utensils from the burner grate. Caution: The burner
cov~r may be hot if the grill burners are in
ope~tion.
2.Push in and turn counter clockwise the gas control
knob for the burner to the LITE position.
3. Rapidly rotate the rotary igniter knob next to the
control knob. A multiple clicking noise should be
heard from the igniter indicating a spark is beingBURNER CONTROL KNOB
provided to the burner.
4.If the burner does not light on the first try, repeat
immediately.
5.If the burner does not light after 5 seconds, turn the
control knobs to the OFF position. Wait 45 seconds
until the gas clears before attempting to light it again.
6.Repeat the procedure or try "Manual Lighting
procedure" below.
7
Upon successful lighting, repeat the process on any
ROTARY IGNITER KNOB
other available burner you may wish to light.
Manually Lighting The Open Burners
Remove the burner cover, if any, or any cooking
utensils from the burner grate. Caution: The burner
cover may be hot if the grill burners are in
operation.
2.Push in and turn counter clockwise the gas control
knob for the burner to the LITE position.
3. Hold a lit match next to the burner ports.
(continued on next page)
24 |
ACEC
WHIRLPOOL
