10. Angular Velocity Sensor Sensitivity Adjustment
Precautions on the Parts Replacement
There are two types of repair parts.
Type A: ENC03JA
Type B: ENC03JB
Replace the broken sensor with a same type sensor. If replace with
other type parts, the image will vibrate up and down or left and
right during hand-shake correction operations. After replacing, re-
adjust according to the adjusting method after replacement.
Precautions on Angular Velocity Sensor
The sensor incorporates a precision oscillator. Handle it with care
as if it dropped, the balance of the oscillator will be disrupted and
operations will not be performed properly.
SubjectArbitrary
Measurement PointDisplay data of page 1 (Note)
Measuring Instrument Adjustment remote commander
Adjustment PageF
Adjustment Address5E, 5F
Specified Value2900 to 4D00
Note: Displayed data of the adjustment remote commander.
1 : XX : XX
Display data
Switch setting:
1) STEADY SHOT (Menu display) ...................................... ON
2) ZOOM .......................................................................... Center
Adjusting method:
Order Page Address DataProcedure
100101Set the data.
2F5ESet the following data, and press
PAUSE button.
51 (NTSC), 75 (PAL)
3F5FSet the following data, and press
PAUSE button.
4A (NTSC), 5A (PAL)
Pitch sensor check
(MI-041 board SE751)
400311Set the data.
51Check that the display data (Note)
satisfies the specified value.
Yaw sensor check
(MI-041 board SE752)
600312Set the data.
71Check that the display data (Note)
satisfies the specified value.
Processing after Completing Adjustments
Order Page Address DataProcedure
100100Set the data.
200300Set the data.
3Move the camcorder, and check
that the steady shot operations
have been performed normally
5-21 |
ACEC
SONY
