Delta 44 board. To display this page, click the OPatchbay/Router� tab of the Delta
Control Panel.
ON THE MAC: Please substitute the name OSM/ASIO� where referrences are made
to OWavOut.� SM/ASIO are the software outputs on the Mac, while WavOut are the
software outputs on the PC. Substitute OWindows multimedia applet� with OSound
Manager Applet.�
The leftmost vertical column of Patchbay/Router page, OH/W Out 1/2,� connects this
hardware analog stereo pair to one of four stereo sources:
1. The default setting, OWavOut 1/2�, connects ports OUT1 and OUT2 to your
music software or Windows multimedia applet. In other words, when music
software plays audio to the device named OWavOut 1/2 Delta-44� it will be
routed directly to the Ohardware� outputs 1 & 2 of your DeltaOs break-out box.44
2. The second option, OMonitor Mixer� connects ports OUT1 and OUT2 to the,
outputs of the Delta 44 monitor mixer. For more information of the capabilities
of the monitor mixer, please see the section OMonitor Mixer Page.�
3. Selections three and four connect the hardware analog inputs 1&2 or 3&4
(respectively) directly to the DeltaOs hardware analog outputs 1&2. For44
example, if OH/W In 1/2� were selected, any signal present at the IN1 port will
be copied to OUT1, and any signal present at the IN2 port will be copied to
OUT2. When OH/W In 3/4� is selected, the routing behaves similarly.
The next vertical column of the Patchbay/Router page OH/W Out 3/4,� connect this
hardware analog stereo pair to one of three stereo sources.
1. The default setting, OWavOut 3/4�, connects ports OUT3 and OUT4 to your
music software or Windows multimedia applet. In other words, when music
software plays audio to the device named OWavOut 3/4 Delta-44� it will be
routed directly to the Ohardware� outputs 3 & 4 of your DeltaOs break-out box.44
2. Options two and three connect the hardware analog inputs 1&2 or 3&4
(respectively) directly to the DeltaOs hardware analog outputs 3&4. For44
example, if OH/W In 1/2� were selected, any signal present at the IN1 port will
be copied to OUT3, and any signal present at the IN2 port will be copied to
OUT4. When OH/W In 3/4� is selected, the routing behaves similarly.
At this point, you may begin to realize the versatility of the Monitor Mixer and the
Patchbay/Router, and the relationship between the two. You may want to re-read this
section and make some practice adjustments within the Delta Control Panel software
to become proficient in routing and mixing. If somewhere in the process you
become confused, you may always restore the default settings to use the card as a
straight 4-in 4-out device N just choose the topmost option in each of the
Patchbay/Router columns.
18 |
ACEC
M-AUDIO
