adjustment (in 1% increments), you may click on the pan control to make it active,
and then use the left/right or up/down cursor keys on your computer keyboard.
Either way, while the pan setting is being adjusted, its value will appear
numerically in the Master Vo l u m e Os status box (below the Master Volume Stereo
Gang control) as a percentage from left pan to right pan: -100% represents far left,
+100% represents far right, and 0% represents the center.
SOLO: Each mixer input channel has a OSolo� checkbox associated with it.
Clicking on and activating a Solo box will solo the selected channel by essentially
muting all other signals. When more than one channel has Solo selected, all solo
channels will be summed to the solo �bussO(path), which is what one might
consider an �in placeOsolo as opposed to a PFL, or pre-fader listen (levels and pans
still apply). Deactivating all solo boxes will return all input channels to their
previous mute/unmute states.
MUTE: Every mixer input channel has a OMute� checkbox associated with it.
Clicking on and activating the Mute box will remove that signal from the stereo
buss. Deactivating the Mute box will add the signal back into the stereo buss.
STEREO GANG: All input channel pairs have a OStereo Gang� capability.
Clicking on and activating the Stereo Gang checkbox will link (or Ogang�) the
left/right faders so that both channels may be adjusted together as a stereo pair.
Patchbay/Router Page
The Patchbay/Router page allows you to connect each of the Delta 66Os hardware
outputs (2 pairs of analog outputs and 1 pair of digital output channels) to specific
audio sources within the Delta66 board. To display this page, click the
OPatchbay/Router� tab of the Delta Control Panel.
ON THE MAC: Please substitute the name OSM/ASIO� where referrences are
made to OWavOut.� SM/ASIO are the software outputs on the Mac, while W avOut
are the software outputs on the PC. Substitute OWindows multimedia applet� with
OSound Manager Applet.�
The leftmost vertical column of Patchbay/Router page, OH/WOut 1/2,� connects
this hardware analog stereo pair to one of six stereo sources:
1. The default setting, OWavOut 1/2�, connects ports OUT1 and OUT2 to your
music software or W indows multimedia applet. In other words, when music
software plays audio to the device named OWavOut 1/2 Delta-66� it will be
routed directly to the Ohardware� analog outputs 1 & 2 of your Delta6 6 Os
break-out box.
2. The second option, OMonitor Mixer,� connects ports OUT1 and OUT2 to the
outputs of the Delta66 monitor mixer. For more information of the
capabilities of the monitor mixer, please see the section OMonitor Mixer Page.�
18 |