Operating sequence
1. Press the On/Off push button7. Close the dishwasher door
The On/Off indicator light comes on, also the
indicator lights of the last selected programme
and relative options come on.8a. Setting and starting the
programme without "delay
2. Check that start"
there is rinse aid and salt Press the push button corresponding to the
desired programme .The indicator lights of
The corresponding indicator lights will illuminate the programme and all the phases the
if refilling is necessary.programme consists of will come on.In the
digital display appears the duration (in
minutes) of the programme .
3. Open the door and check the
lSelect if necessary the washing on only one
filters basket by pressing the half loadpush
button.
Ensure they are clean and properly positioned
(see "Maintenance and cleaning").Remember to load all dishes into the
selected basket.
Press "programme start" push button, an
4. Load the dishes audible signal advises you that the
Remo ve any scraps of food.programme has started.
Pull the lower basket out and arrange the The display will show the running time
saucepans, plates and cutlery in it.
of the programme and the indicator lights of
Pull the upper basket out and arrange the the phases will turn off except for the
plates, saucers, glasses and cups etc.in it.indicator light of the current phase.
Slide the baskets back into the machine.
The time in the digital display will start to
decrease from minute to minute.
If the door is opened during the run of the
5. Ensure that the spray arms can programme the current phase will be
interrupted and the indicator light of the
rotate freely.interrupted phase will start to flash.
Once the door is closed the programme will
start from the point where it was interrupted.
6. Measure out detergent
Add the required amount of detergent into the
dispenser.
Close the detergent dispenser lid.
Important!
If "half load" option is selected remember to
reduce the quantity of detergent
16SEQ32en |
ACEC
ZANUSSI
