VQT0Y69ENG.book 93 k 9�9�9â237676 e9�9�7
Connecting to other equipment
+ Conditions under which a different You may not be able to play back motion
folder number is usedpictures on the card correctly when the
In the following cases, the picture is not camera is connected to a PC. Import the
recorded in the same folder as the motion picture files to the PC and then
previously recorded picture. It is recorded play them back.
in a folder with a new number. If battery power is exhausted while the
1 When the folder just recorded to contains camera and the PC are communicating,
the recorded data may be damaged.
a picture file with the number 999 in it
(example: P1000999.JPG).When you connect the camera to the PC,
use a battery with sufficient battery power
2 When the card just recorded to contains,
(P13) or the AC adaptor (DMW-AC5;
for example, a folder with the number optional).
100 [100_PANA] in it and that card is
If the remaining battery power becomes
removed and replaced with a card that low while the camera and the PC are
has a folder with the number 100 in it
communicating, the status indicator blinks
recorded by a camera from a different and the alarm beeps. In this case, stop
maker (100XXXXX, with XXXXX being the communication at once on the PC.
the name of the maker) and then a When connecting the camera to a
picture is recorded.?Windows 2000? OS PC with the USB
3 When recording after selecting connection cable, do not replace the
[NO.RESET] (P22) from the [SETUP] card while the camera and the PC are
menu. (Pictures will be recorded to a connected. The information on the card
new folder with a number sequential to may be damaged. Disconnect the USB
the folder recorded to immediately connection cable before replacing the
before. By using [NO.RESET] on a card card.
that does not contain folders or pictures, Pictures edited or rotated with a PC may
such as one just formatted, the folder be displayed in black in playback mode
number can be reset to 100.)(P33), multi playback (P65) and calendar
+ PictBridge (PTP) settingplayback (P66).
For information about this, refer to the
Even if you set [USB MODE] to
[PictBridge (PTP)], you can connect to your separate operating instructions for PC
connection.
PC if the OS is ?Windows XP? or ?Mac OS
Read the operating instructions for the
X?.PC.
Pictures can only be read on the camera.
If a card is not inserted when the camera
They cannot be written to a card or is connected to the PC, you can edit or
deleted.access the pictures on the built-in
When there are 1000 or more pictures on memory. If a card is inserted, you can edit
a card, the pictures may not be imported.or access the pictures on it. (DMC-FX3)
You cannot switch between the built-in
memory and the card while the camera is
Do not use any other USB connection
connected to the PC. When you want to
cables except the supplied one.switch between the built-in memory and
Do not disconnect the USB connection
the card, disconnect the USB connection
cable while [ACCESS] is displayed.cable, insert (or remove) the card and
When there are many pictures on the
card, it may take some time to transfer then connect the USB connection cable to
the PC again. (DMC-FX3)
them.
93
VQT0Y69 |
ACEC
PANASONIC
