DP-2310/3010
DP-2330/3030
4.1.7.F8 Mode: Service Adjustment
Set the machine to Service Mode and press "8" key on the Keypad.
?
Press the "START" key.
?
Select the desired code number on the Touch Panel display.
?
If you wish to select another code number, scroll the menu with the arrow buttons.
?
Select the desired function on the Touch Panel display and touch the "OK" button.
?
When the "C (CLEAR)" key is touched, the selected code input will not be accepted.
?
Press "FUNCTION" and "C (CLEAR)" keys simultaneously to exit the service mode.
F8 Mode
No.ItemRemarks
00Exp. Lamp replacementWhen replacing the exposure lamp.
Procedure:
a) Press the Start key to move the exposure lamp to
the position (approx. 250 mm from the optics
home position) where it can be replaced.
b) To return the optical system to the home position,
press the CLEAR key.*
01-05 Not Used
06Error Log Print/Viewa) Each time the arrow key is pressed, the machine
errors or paper jam codes stored in memory are
displayed, beginning with the oldest code.
Note:
Only the 30 most recent codes are displayed.
07Error Log Cleara) Press the Reset key.
A Message "Error code can be cleared with the
Start key" is displayed on the LCD.*
b) Press the Start key.
08(Factory use only)Lock operation for Scanner Unit.
09Toner Density adjustmentAdjustment operation of Toner Density.
10Drum Charge adjustmentAdjustment operation of Drum Charge.
11Not Used
12Org.size Sensor Adj.Adjust the slice level for the original size detection
sensors automatically. Execute this mode by closing
the platen cover.
13Black Density referenceAdjustment operation of Black Density sensor.
14Black Density gainAdjustment operation of Black Density sensor gain.
15QUANTUM PatternPrint out the QUANTUM Test Pattern.
16-17 Not Used
18LSU PWM PatternPrint out the Test Pattern.
Proceed when the LSU is replaced.
100
Ver.2.0DEC 2004 |
ACEC
PANASONIC
