5. Push door firmly closed. The door latches automatically. Run Preparing the faucet
hot water at the sink where you will connect dishwasher until 1. Remove the screen holder or aerator, screen, and washer
water is hot. (See ?Dishwasher Efficiency Tips.?) Turn off the from the end of the faucet.
water and hook the dishwasher to the faucet. (See 2. Use the faucet adapter kit that came with your portable
?Connecting Your Dishwasher.?) Turn on the hot water.
dishwasher to modify the faucet where the dishwasher will be
used.
6. Press the desired cycle and option selections. (See
?Dishwasher Use.?)
1. Washer
2. Screen
3. Screen holder or aerator
NOTE: Remove and save the washer, screen, and screen holder
or aerator for future use.
Connecting the faucet adapter to faucets with
Stopping Your Dishwasherexternal threads
You can stop your dishwasher anytime during a cycle.Insert the two screens and then the thin washer from the faucet
adapter kit into the faucet adapter. Attach the adapter onto the
1. Open the door slightly. end of the faucet.
2. Wait for the spraying action to stop. Then open the door all
the way, if needed.
Close the door to continue the cycle.
OR
Press CANCEL/DRAIN. A 2-minute drain starts.
CONNECTING YOUR
1. Thin washer
PORTABLE DISHWASHER2. Screens
3. Faucet adapter
NOTE: Do not use the thick washer.
Connecting the Faucet Adapter
NOTE: A special adapter must be installed on the faucet before Connecting the faucet adapter to faucets with
the dishwasher can be connected. Complete Installation internal threads
Instructions and the adapter are packed with your dishwasher. Insert the 2 screens, the thin washer, and then the thick washer
(See the Installation Instructions.) from the faucet adapter kit into the faucet adapter. Attach the
When moving your dishwasher, make sure the door is latched. adapter onto the end of the faucet.
Hold the dishwasher at the top front corners.
1. Thick washer
2. Thin washer
3. Screens
4. Faucet adapter
NOTE: Use both washers.
8 |
ACEC
WHIRLPOOL
